Dr350 rebuild

Updates coming friday.

Engine mounted
cush drive arrived
Started to polish forks
airbox opened up and all fitted with carb

All thats left to do is wiring back in and respray the tank then im finished but that can wait till it get warmer.

Ok this time its for real.

updates update updates!!!!

engine is mounted and some nice shiny bits after a good scrub sand and what not.
carb and airbox all in
loom is in and plugged up apart from lights ect.
Breaks got vapour blated and sprayed so look the part now aswell with their shiny stainless pistons.
spacers finally came so got the sm wheels on and a nice wavy disk for the rear ( front one coming soon )

pics will be up tomorrow for those nosey lot of you.

Originally Posted by BBadger

Ok this time its for real.

updates update updates!!!!

engine is mounted and some nice shiny bits after a good scrub sand and what not.
carb and airbox all in
loom is in and plugged up apart from lights ect.
Breaks got vapour blated and sprayed so look the part now aswell with their shiny stainless pistons.
spacers finally came so got the sm wheels on and a nice wavy disk for the rear ( front one coming soon )

pics will be up tomorrow for those nosey lot of you.

Yay! About blurry time.

Lookin forward to the finished product, good work so far fella!

life got in the way but only a day late

the bike atm. You can just about see the nice shiny engine mounts



its finally taking shape since parts have come and there really isnt much left to do mechanically now just abit of wiring, sorting out the exhaust and then plastics and its away!

Nice oversized hole in the airbox to match the up jetting



forgot to take pics of the brakes but they look just like the sprocket carrier in the pics...clean and silver after a vapour blast and spray.

next is the forks me thinks.

nice tip about the cat litter, bare that one in mind.

otherwise nice project you got here

'Bout bloody time too!!!



Looking good there

just little things today.

cleaned and mounted the tank airfilter and seat along with rebuilding the brakes.
so its looking more bike like with my barny the dinosour seat on it.

Bit of a bummer now im back at uni so cant get anything done for a few months again.

But everything is ready to go before i left.
Brake all fitted just got to put lines on
waiting on the new rear sprocket to arrive
New exhaust for £90 instead on 120 as the fmf was knakered when i took it apart but only £10 so not a killer.

Mock fitted all the plastics and it looked good.
all thats left is main light switch gear to ride it.
In time revamp of all the suspension and itll be a hooligan machine

Looking at a very cheap acerbis 4 gallon tank atm aswell which would be lovely and finish the bike off i think.

Been a while folks.

the odd bits been done here and there but its essentially ready for the plastics to wack on a take for a spin.
So as of next weekend a full exhaust system. fully wired bar headlight all breaks working and everything where it should be.

Over Easter and to stop myself from becoming a complete swat of a student i should hopefully get it into one finished piece bar suspension work that will start in june, that ill do some nice pics and write up for you all which includes a full rear shock strip down and re-gas which im quiet excited about myself.

pics man pics, lol