SV650.org - SV650 & Gladius 650 Forum



SV Talk, Tuning & Tweaking Discussion and chat on all topics and technical stuff related to the SV650 and SV1000
Need Help: Try Searching before posting

Reply
 
Thread Tools
Old 30-06-18, 04:55 PM   #1
Toooldtodie
Member
 
Toooldtodie's Avatar
 
Join Date: Jun 2012
Location: Chelmsford
Posts: 410
Default Gonna be a lumpy ride...

I have put up with this syndrome for years.
When my SV gets hot circa 90 degrees + it gets a bit hesitant when on the throttle, can bog momentarily or miss a beat, especially when pulling away from a standing start.
Am I being too accepting or should I be doing something about it, and if so, what?
__________________
Thought I was in a bad mood, but it's been 30 years now, so I suppose it's just who I am.
05 SV650s now with proper suspension, hurrah!
Toooldtodie is offline   Reply With Quote
Old 01-07-18, 07:59 PM   #2
R1ffR4ff
Member
Mega Poster
 
R1ffR4ff's Avatar
 
Join Date: Feb 2017
Location: JAMOADR(1999 Curvy) 36,000 miles
Posts: 1,427
Default Re: Gonna be a lumpy ride...

Try half a bottle of Redex in the tank.Won't do any harm,might help and is cheap liquid maintenance

Otherwise I might suspect a Spark plug cap has gone too high on Resistance.They come stock @ 5k ohms.Anything over 8K ohms and I replace them.I use NGK straights as they are way cheaper than OEM.
__________________
"Stultus est sicut stultus facit"
R1ffR4ff is offline   Reply With Quote
Old 01-07-18, 09:55 PM   #3
Bibio
Member
Mega Poster
 
Bibio's Avatar
 
Join Date: Jul 2008
Location: here as devil's advocate
Posts: 11,538
Default Re: Gonna be a lumpy ride...

you should have investigated years ago. intermittent faults like this can leave you stranded when they do decide to fail completely.

fuel cleaner wont do shizz in this instance as its heat dependant so either breather, fuel vapour lock or electrical contact breaking down (the hotter the wire the more resistance).

i would start with taking each connector apart and lightly spraying acf-50 in them.

next up would be the charging system when its hot.

after that is anyone's guess.
Bibio is offline   Reply With Quote
Old 02-07-18, 06:50 AM   #4
Craig380
Member
Mega Poster
 
Join Date: May 2015
Posts: 1,231
Default Re: Gonna be a lumpy ride...

I'd start by checking the two sensors in the airbox, make sure they are clean and not covered in oily film. Clean the connectors while you're at it, and any others you can get at as Bibio said.

While the tank is up, get some switch cleaner like Deoxit (or just a residue-free cleaner) and give the back of the TPS a good spray, where the plastic body of the TPS meets the metal plate. Some of the cleaner will get into the TPS, then work the throttle gently several times. This can help clean the sliding contact in the TPS of crud/tracking.

Check the rubber caps on the throttle bodies carefully for splits or holes too, one of those could be upsetting low-rpm.
Craig380 is offline   Reply With Quote
Old 02-07-18, 02:02 PM   #5
yorkie_chris
Noisy Git
Mega Poster
 
yorkie_chris's Avatar
 
Join Date: Apr 2007
Location: Halifax/Leeds
Posts: 26,645
Default Re: Gonna be a lumpy ride...

Rear coil breaking down, replaced quite a few, is a possibility
__________________
Currently Ex Biker
Now rebuilding a 63' fishing trawler as a dive boat
yorkie_chris is offline   Reply With Quote
Old 02-07-18, 04:51 PM   #6
Toooldtodie
Member
 
Toooldtodie's Avatar
 
Join Date: Jun 2012
Location: Chelmsford
Posts: 410
Default Re: Gonna be a lumpy ride...

Thanks fellas.
Will check a few at a time. I will do the connectors first as I know they give grief on the SV.
__________________
Thought I was in a bad mood, but it's been 30 years now, so I suppose it's just who I am.
05 SV650s now with proper suspension, hurrah!
Toooldtodie is offline   Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
lumpy sv ajdclayton SV Talk, Tuning & Tweaking 1 22-05-11 09:12 AM
I'm gonna be getting paid to ride one of these all day at work husky03 Idle Banter 29 30-11-09 09:32 PM
The "Are you gonna be at soho this friday as paws is gonna be there" thread Paws Soho Massive 59 28-01-08 08:30 PM
Are lumpy bumpy pillions welcome? goldfish South & West Surfers 11 23-10-06 05:29 PM
Lumpy idle Supadan SV Talk, Tuning & Tweaking 7 01-08-05 05:06 PM


All times are GMT. The time now is 11:08 AM.


Powered by vBulletin® - Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.