Picture of the pointy rear light mount bracket please.

Hi all, currently doing this:

http://forums.sv650.org/showthread.php?t=159211

Was going to go the whole hog with pointy plastics etc, but too much ag and expense

anyone got a picture of the pointy rear light mount bracket/plate? Ive drawn up a couple of paper templates to see what works best, but maybe the actual bracket could be modified better for a curvy.

Nice clear pic next to a rule would be great, (im assuming it does actually have a seperate bracket like the curvy?

Thanks, Lee

I prefer the pointy front end, if I was so inclined I'd look into it, but I'm not, mainly becuase I know I'd **** it up.

Looks good though.

[DarrenSV650S]

I'm pretty sure it just screws on to the plastics

I think that will look good when finished mate, too much messing about for me though.

I got fed up of the curvy back bit and saw red today; I took a wood saw to it lol. Work in progress.



Had to move what i assume is the ecu forward into the tool area, that housing can then be then folded up nicely to cover most of the gap left over.

It does look like it could bolt directly onto the plastics, but just wanted to check. i`ll be making the Zunkus undertray as well to go with the light mod, that will need some adjusting to suit too.

Is a fair bit of work, but luckily I can get all materials from work, and have welders and sheet metal depts at work on hand if need be, just need to ply them with goodies from the food vending machine

Originally Posted by leebex

It does look like it could bolt directly onto the plastics, but just wanted to check. i`ll be making the Zunkus undertray as well to go with the light mod, that will need some adjusting to suit too.

Is a fair bit of work, but luckily I can get all materials from work, and have welders and sheet metal depts at work on hand if need be, just need to ply them with goodies from the food vending machine

Jammy beast.