SV Talk, Tuning & Tweaking Discussion and chat on all topics and technical stuff related to the SV650 and SV1000 Need Help: Try Searching before posting |
|
Thread Tools |
11-11-17, 12:23 PM | #1 |
Member
Join Date: Jun 2016
Location: Rochester,Kent.
Posts: 824
|
Water Pump Cover Removal
Hi Guys,
So, I thought I would start my winter jobs with a simple one - removing my curvy's water pump cover for refinishing. Haynes Manual read (useless), coolant drained, hoses disconnected, three screws out and a little tap on the hose stub and it starts to come off but the backplate is stuck to it and there is something stopping the backplate from coming off the crankcase with the outer cover. At this point as there are no flats on either casting to tap against, I thought it best to stop and ask the collective. Any advice greatly appreciated thanks. DSC_0156 by Andrew Hayes, on Flickr Last edited by Blapper; 11-11-17 at 12:44 PM. |
11-11-17, 12:47 PM | #2 |
Member
Mega Poster
Join Date: Feb 2017
Location: JAMOADR(1999 Curvy) 36,000 miles
Posts: 1,431
|
Re: Water Pump Cover Removal
I'm sure someone with more experience of these bikes will be along Blapper but when I have this kind of problem I find a Partsfiche can help,
https://www.cmsnl.com/suzuki-sv650-1...251/partslist/ Just pick the one for your morel/year(Put that info under your Avatar as it helps) and bookmark your page
__________________
"Stultus est sicut stultus facit" |
11-11-17, 12:55 PM | #3 |
Member
Mega Poster
Join Date: Jul 2008
Location: here as devil's advocate
Posts: 11,540
|
Re: Water Pump Cover Removal
you have to remove the whole clutch cover then disconnect the drive gear inside. its the drive gear thats stopping the pump from coming off.
|
11-11-17, 01:23 PM | #4 |
Member
Join Date: Jun 2016
Location: Rochester,Kent.
Posts: 824
|
Re: Water Pump Cover Removal
Thanks R1ffR4ff.
Bibio: I dont want to remove the inner cover and water pump, I only want to remove and refinish the outer cover - is it still necessary to remove the clutch cover to just do that? Thanks. |
11-11-17, 01:30 PM | #5 |
Member
Mega Poster
Join Date: Jul 2008
Location: here as devil's advocate
Posts: 11,540
|
Re: Water Pump Cover Removal
yes you have to remove the whole clutch cover to remove the water pump (cover). the water pump has a shaft that runs through a bearing and inside the clutch cover that connects to a drive gear. to remove the water pump (cover) you must remove the drive gear inside the clutch cover.
word of warning about curvy clutch covers, they warp very easily. to lessen the chance of it warping you must star loosen and tighten the bolts. |
11-11-17, 01:32 PM | #6 |
Member
Join Date: Jun 2016
Location: Rochester,Kent.
Posts: 824
|
Re: Water Pump Cover Removal
Thanks Lance, I appreciate you taking the time to explain that.
Dammit! LOL! |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
water pump cover for 02 curvy | tfboy | Stuff Wanted | 4 | 14-05-14 05:31 PM |
Refinishing water pump cover? | alol | SV Talk, Tuning & Tweaking | 3 | 03-08-12 09:35 AM |
Corroding water pump cover. | metalhead19 | SV Talk, Tuning & Tweaking | 8 | 07-12-10 10:13 PM |
Cover for the Water Pump - Curvy | Demonz | Stuff Wanted | 4 | 15-10-08 07:44 PM |
Cracked water pump cover? | tradedog | SV Talk, Tuning & Tweaking | 4 | 11-04-06 04:09 PM |