K3 front end - SV650.org

Lewis82 · 03-03-24, 04:36 PM

Have tried the search bar on forum but it won't allow me to type anything in it just disappears 🙄

I imagine this has been covered loads so hopefully there's some helpful comments and links about 😉

I think my k3 currently has standard front end and a nitron r1 rear. I'm hoping to get a bar conversion on there but wondering if it's worth doing a gsxf/gsxr front end conversion but have no idea what needs changing.

What tried and tested routes are worth pursuing. On a tight yorkshiremans budget 😉

NedSVS · 03-03-24, 05:09 PM

Have you tried "advanced search"? Click on search, then advanced search in the little box/window that appears. Or, try a right click on search and select "open link in new tab".

admin · 03-03-24, 05:14 PM

I can duplicate the search error on my samsung tablet but it works okay on a windows PC.

NedSVS · 03-03-24, 07:22 PM

I suspect a pop-up blocker is closing it automatically.

Seeker · 03-03-24, 07:39 PM

You can use google to search this site by typing into your browser url ("bar swap" for example):

site:forums.sv650.org/ bar swap

I use firefox and it works for that browser

admin · 03-03-24, 07:50 PM

Quote:

Originally Posted by NedSVS

I suspect a pop-up blocker is closing it automatically.

My thoughts too.

Sent from my SM-T510 using Tapatalk

Bibio · 04-03-24, 09:37 AM

i'll chime in here and no not about the forum search...

GSXR front end conversions are expensive and all you gain is adjustability and better brakes. you can fettle the front of the standard forks with upgraded sprigs to suit your weight and oil to gain about 80-90% performance of gsxr forks. this along with a good strip and service of your callipers should see you good for street riding.

Jayneflakes · 29-03-24, 10:52 AM

I have a K3, with both a bar conversion and a front end swap. The whole job cost more than my bike is probably worth, but she looks amazing and rides beautifully. However, I made the swaps because I have a disability and could no longer bend over clip on bars and needed very soft suspension to ease further back pain. You can find my whole build thread here.

I used a set of R1 forks (purchased on here), with GSXR yokes that I had machined and then had risers fitted to. The forks were stripped and rebuilt by MCT with a mix of Maxton and Ohlins internals. I have upgraded brakes because I have weak and arthritic hands and appreciate the extra braking power. I am currently thinking about changes I can make to the cutch because on long rides, I struggle to pull the clutch lever. The biggest tip I have for you is don't grow old. Stay young forever!

glang · 29-03-24, 12:25 PM

Quote:

Originally Posted by Jayneflakes

The biggest tip I have for you is don't grow old. Stay young forever!

Ah unfortunately thats even more expensive than a front end swop

Seeker · 29-03-24, 12:35 PM

Quote:

Originally Posted by Jayneflakes

I am currently thinking about changes I can make to the clutch because on long rides, I struggle to pull the clutch lever

You need the new Honda E-clutch
https://www.visordown.com/reviews/mo...ch-gamechanger

03-03-24, 04:36 PM	#1
Lewis82 Junior Member Join Date: Oct 2022 Posts: 1	K3 front end Have tried the search bar on forum but it won't allow me to type anything in it just disappears 🙄 I imagine this has been covered loads so hopefully there's some helpful comments and links about 😉 I think my k3 currently has standard front end and a nitron r1 rear. I'm hoping to get a bar conversion on there but wondering if it's worth doing a gsxf/gsxr front end conversion but have no idea what needs changing. What tried and tested routes are worth pursuing. On a tight yorkshiremans budget 😉

03-03-24, 05:09 PM	#2
NedSVS Member Join Date: Mar 2005 Posts: 567	Re: K3 front end Have you tried "advanced search"? Click on search, then advanced search in the little box/window that appears. Or, try a right click on search and select "open link in new tab". Last edited by NedSVS; 03-03-24 at 05:13 PM.

03-03-24, 05:14 PM	#3
admin John T Mega Poster Join Date: May 2003 Location: Shrewsbury, Shrops, UK Posts: 2,455	Re: K3 front end I can duplicate the search error on my samsung tablet but it works okay on a windows PC. __________________ Admin for this forum and the main site. John@sv650.org

03-03-24, 07:22 PM	#4
NedSVS Member Join Date: Mar 2005 Posts: 567	Re: K3 front end I suspect a pop-up blocker is closing it automatically.

03-03-24, 07:39 PM	#5
Seeker Member Mega Poster Join Date: Jun 2016 Location: NE Lincs Posts: 1,069	Re: K3 front end You can use google to search this site by typing into your browser url ("bar swap" for example): site:forums.sv650.org/ bar swap I use firefox and it works for that browser __________________ 2016 SV650AL7 2023 GSX-8S

04-03-24, 09:37 AM	#7
Bibio Member Mega Poster Join Date: Jul 2008 Location: here as devil's advocate Posts: 11,540	Re: K3 front end i'll chime in here and no not about the forum search... GSXR front end conversions are expensive and all you gain is adjustability and better brakes. you can fettle the front of the standard forks with upgraded sprigs to suit your weight and oil to gain about 80-90% performance of gsxr forks. this along with a good strip and service of your callipers should see you good for street riding.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Wanted Sv 650 curvy front right hand side front fairing blue	swifty09	Stuff Wanted	7	28-12-11 08:00 PM
Injected Front Wheel Axle and Front Master Cyl Brkt	adjblade	Stuff Wanted	2	19-01-11 08:07 AM
K3 front brake lever, Front indicator (RH), Front Mirror(RH), Bar End (RH)	leegriffiths128	Stuff Wanted	0	23-07-08 09:11 PM
Front Discs (pair) for sv650 '99 curvy + Front wheel	mikeSV	Stuff Wanted	1	28-05-08 04:21 PM
SV650s 2000 model, yellow. I need front central and front right fairing.	OdySV	Stuff Wanted	0	25-02-07 04:47 PM