SV Talk, Tuning & Tweaking Discussion and chat on all topics and technical stuff related to the SV650 and SV1000 Need Help: Try Searching before posting |
|
Thread Tools |
18-05-06, 05:38 PM | #1 |
Guest
Posts: n/a
|
Any ideas (photos included)
|
18-05-06, 08:35 PM | #2 |
Guest
Posts: n/a
|
Mask the brake surface of and spray with hammerite primer then a couple of top coats of hammerite gold!!! oh and don't forget to clean it first with thinners
|
20-05-06, 11:24 PM | #3 |
Guest
Posts: n/a
|
Use paint stripper to remove the black paint, get a nice 'machined look' like on my GSXR wheel for my front end swap
A wire brush or wire drill attachment should shift the rust. Soak the disc bolts in viniger or paraffin for a few days will tidy them up. |
20-05-06, 11:47 PM | #4 |
Guest
Posts: n/a
|
In the short term, steel wool to remove the rust. Mkae sure you clean all the debris off afterward.
|
21-05-06, 11:13 AM | #5 |
Guest
Posts: n/a
|
cheers gang
as soon as the weather cheers up i will try these suggestions letya know how i get on |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
First ever ride, was i in the wrong? (diagram included) | Magnum | Bikes - Talk & Issues | 32 | 19-02-09 11:44 PM |
ideas please | busasean | Idle Banter | 6 | 29-02-08 05:41 PM |
Any Ideas? | melody | 2007 Annual Rideout | 22 | 17-06-07 12:55 PM |
Oil.. Any ideas????? | k3lls | SV Talk, Tuning & Tweaking | 11 | 04-05-06 01:08 PM |
Any ideas? | sticky-dizzle | Bikes - Talk & Issues | 11 | 04-05-05 08:55 PM |