GSXR750 K7 Front End (90%) Done

Onto my 2000 Curvy.
Still to do: Speedo, looking at all the front wheel installations threads looking for the best “factory” look. I do remember,(but can’t find the thread/picture) one that was fitted on the inside of the front fender.
Having tried to refit the upper fairings, the GSXR clip-on’s will have to go, as they hit the bodywork. Have put a request in the wanted ads for a set of TL1000S clip-on’s.
The steering stops don’t work, but until I get the new clip-on’s, I can’t tell if this is a issue or not.

Went out for a installation check yesterday,(without upper fairings) felt very good, especially the brakes, even with the new (un bedded) EBC HH pads.

Can’t wait for a dry day, and to get hold of the clip-on’s, so if anyone has/knows who selling a set!!!!!.

Will post better photos when finished.

Mike

[yorkie_chris]

Lack of steering stops is an issue at MOT time. Use of SRAD750 yokes will let lockstops work.

that looks so cool.

have you, or can you provide, a step by step guide to doing this, complete with a parts list?

My dad just happens to have a GSXR750 K6. He dosnt use it much...so i suppose he wont mind if i swap my forks for his...

[yorkie_chris]

Gah... search function.

SRAD750 yokes... rest of a 750K6 front end ... a bearing from TWF ... time ... grease ... loctite... magnets ... sensor... etc

Originally Posted by yorkie_chris

Lack of steering stops is an issue at MOT time. Use of SRAD750 yokes will let lockstops work.

Hadn't thought about the MOT.
I will get the the K7 yoke modified, as after reading all the threads,there seems to be issues with mixing different yokes,something to do with offsets.
Mike

Oh i havnt got time to search, just hand me a damn instruction guide!

Originally Posted by alpinestarhero

that looks so cool.

have you, or can you provide, a step by step guide to doing this, complete with a parts list?
..

Thanks
Will put something together,when it is 100%
Mike

Originally Posted by shelleyamy

Thanks
Will put something together,when it is 100%
Mike

fangyoo

Originally Posted by alpinestarhero

Oh i havnt got time to search, just hand me a damn instruction guide!

I know the feeling, reading all the differrent threads was the hardest part.
Mike

That looks smart. I thought it was harder to fit later radial forks to a curvy? Very nice anyway