Curvy lightened Flywheel assembly

[millemille]

Originally Posted by Nicky S

I'm in

Is the naked and s fly wheel the same ??


Sent from my iPhone using Tapatalk

All carbed flywheels are the same, all injected flywheels are the same (allowing for manufacturing tolerances).

[Eulaca]

Thanks for sorting my flywheel, it looks good. I'll try and get it all back together this weekend.

[millemille]

Originally Posted by Eulaca

Thanks for sorting my flywheel, it looks good. I'll try and get it all back together this weekend.

No problem, hope you're pleased with the improvement when you ride it.

[maviczap]

Filled mine with oil & fired it up last night, no nasty noises from my mechanical hamfistedness, just need to get it MOT'd for a test ride & also fit the pointy cams I've had for ages

[robertw95]

Hi mike im coming round to fitting the flywheel back in my engine after its had its full rebuild. I have still to re fit flywheel and cylinder heads. I had a look at the body and can still see the timing marks but no letter f or r is there a way to determine this? Im pretty sure one mark should be 180 degrees from the other for the rear cylinder is this correct? Thanks

Hi Rob, we will be fitting Ks on Sunday 5pm if you want to pop over, I have a spare original you can take and mark yours from this if need be.

We have had four lightened flywheels from Millemille for our SV race bikes. We are going testing in Spain in just over a month so should have some feedback then. Thanks for the excellent service Mike.

[millemille]

Originally Posted by robertw95

Hi mike im coming round to fitting the flywheel back in my engine after its had its full rebuild. I have still to re fit flywheel and cylinder heads. I had a look at the body and can still see the timing marks but no letter f or r is there a way to determine this? Im pretty sure one mark should be 180 degrees from the other for the rear cylinder is this correct? Thanks

Just align one of the marks and see which piston is at the top of the barrel.

As the meerkat says, simples!

[millemille]

Originally Posted by N1xxl

We have had four lightened flywheels from Millemille for our SV race bikes. We are going testing in Spain in just over a month so should have some feedback then. Thanks for the excellent service Mike.

No worries my friend.

We'll be really interested to hear your views on the improvements.

[I.Porter]

Hello all,
I machined all the flywheels and sprags for millemille when he was still offering this service. I have continued to do the machining on a one off basis when he directs forum members over to me. If you need an SV650 flywheel and sprag clutch ring machining just fire me a message.

Current pricing is £100 for the flywheel and £100 for the sprag ring + £10 UPS delivery (carb or injection version)
Spec is as described in the above thread.

Please note: I am not willing to take on the risk of removing the magnets.

Turn round time will depend on the work load I have on at the time, but less than 2 weeks would be normal. I'm sure you will appreciate that this type of work has to fit in around the regular commercial work load.

my website is https://www.iporterltd.co.uk/
facebook https://www.facebook.com/IPorterLtd
instagram https://www.instagram.com/iporterltd

I use Haas and Doosan CNC's.

I hope this is of some help.