High Mounted Exhaust

Hi guys,

I am planning on getting an integrated tail lilght unit so I can loose my sticky out indicators and mount the exhaust higher.

I'll be doing this with the standard can and then changing the can later on down the line.

What is needed to do this, I assume some form of link pipe and a different bracket?

Any advice or links to what I need to buy?

Cheers,

Toby

Just be aware that the integrated tail light/indicators are not legal on the UK roads.

Some on here use them , but they are not as good as the standard indi's and you may have plod take more interest in you

Originally Posted by speedplay

Just be aware that the integrated tail light/indicators are not legal on the UK roads.

Some on here use them , but they are not as good as the standard indi's and you may have plod take more interest in you

Ah ok mate. I've attached a pic of my bike. Is it possible to high mount an exhaust keeping the indicators I have?

Originally Posted by toby_smith

Ah ok mate. I've attached a pic of my bike. Is it possible to high mount an exhaust keeping the indicators I have?

Of course it is.

I had the same high level renegade on bith my curvy and pointy sv.

Originally Posted by speedplay

Of course it is.

I had the same high level renegade on bith my curvy and pointy sv.

Sound. What is required in the way of brackets and link pipes?

Thanks for your replies

On my curvy, the link pipe and can were supplied together from Renegade.
The bracket was a simple band round the can and a smaller band to go round the bungee bar under the seat.

Cant see the bracket, but you can see the can under the rear indicators.


Same can on my pointy :-