Idle Banter For non SV and non bike related chat (and the odd bit of humour - but if any post isn't suitable it'll get deleted real quick). There's also a "U" rating so please respect this. Newbies can also say "hello" here too. |
|
Thread Tools |
25-04-10, 11:09 AM | #1 |
Evel Knievel
Mega Poster
Join Date: Jun 2007
Location: Eastleigh
Posts: 4,641
|
engine head removal
yeah i know this isn't a car forum but im complete stumped
changing the head gasket on my astra...... I've done pretty much every thing haynes says to release the head from the block but i cant get it off, the LH side (if stood over the front facing the car) of the block is free as i can lift that side ever so slightly (literally 2mm) and water drips out ect its fairly loose but the RH side of the block is completely stuck and wont budge yet i cant see anything holding it which has left me , i know the dowels are meant to stick but this is more than that i've really tugged at it and got nothing any idea's? |
25-04-10, 11:26 AM | #2 |
Evel Knievel
Mega Poster
Join Date: Jun 2007
Location: Eastleigh
Posts: 4,641
|
Re: engine head removal
auxiliary belt is off, cambelt is off, cam followers are off, rocker cover/top cap is off, head bolts cracked in sequence and removed, exhaust manifolds disconnected, sparkies out, tubes and hose disconnected
but something on the left is holding the head on |
25-04-10, 11:43 AM | #3 |
Guest
Posts: n/a
|
Re: engine head removal
no silly little extra head bolts anywhere? when i did my mates gpz head yesterday there were two small head bolts in addition to the 8 main ones. one was external on the inlet side, the other was inside the head hidden behind the cam chain guide blade on the exhaust side.
i dont know owt about cars... |
25-04-10, 12:15 PM | #4 | |
Evel Knievel
Mega Poster
Join Date: Jun 2007
Location: Eastleigh
Posts: 4,641
|
Re: engine head removal
Quote:
i've done it now....... would you believe it was a pi$$y little bracket on the top of the alternator and ONE!! of three bolts left holding the engine mount lug onto the block that was hidden behind a cambelt pully now got the head off but i'll do my back if i lift it as i have no engine hoist, i think i'll celebrate with a "sport of lunch and afternoon tea what what" and wait for my hired help to arrive and help me lift |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Engine removal tips? | mikelcfc | Bikes - Talk & Issues | 15 | 06-01-10 08:08 PM |
Head Bearing Removal | svdemon | SV Talk, Tuning & Tweaking | 3 | 30-05-09 07:22 AM |
Any guides on engine removal? | breakz187 | SV Talk, Tuning & Tweaking | 0 | 17-05-09 07:21 PM |
Engine removal tool | sickboygti | Stuff Wanted | 8 | 30-09-07 06:49 AM |
Engine Removal - Any Tips anyone? | Daimo | SV Talk, Tuning & Tweaking | 1 | 09-08-06 10:30 AM |