bent up thingy - SV650.org

13-02-06, 02:28 PM

hey people just a quick question, on my 02 sv ive noticed that the metal bar that holds the caliper from the frame to the disk is a bit bent, is this anything to worrie about? sorry i havent explained that well but hopefully u understand, o yea its on the rear left if ur looking at the bike head on cheers

13-02-06, 02:40 PM

Is this the bar that is about 6 inches below found under the swing arm ??

TSM · 13-02-06, 02:58 PM

If your are talking about the torque arm on the rear brake, its ment to be bent as the caliper is offset from the swingarm.

13-02-06, 03:00 PM

TSM - thats what i ment, no.....really it is

13-02-06, 03:26 PM

yea thats the one, thanks i jus thaught that it looks like sum1 has gone in to the back of the bike n bent it up, cheers for the help glad it supposed to b like that

13-02-06, 02:28 PM	#1
wtdafk Guest Posts: n/a	bent up thingy hey people just a quick question, on my 02 sv ive noticed that the metal bar that holds the caliper from the frame to the disk is a bit bent, is this anything to worrie about? sorry i havent explained that well but hopefully u understand, o yea its on the rear left if ur looking at the bike head on cheers

13-02-06, 02:40 PM	#2
w.steele Guest Posts: n/a	bent bit? Is this the bar that is about 6 inches below found under the swing arm ??

13-02-06, 02:58 PM	#3
TSM The Sick Man Mega Poster Join Date: Nov 2004 Location: Peckham.SE.LDN Posts: 4,768	If your are talking about the torque arm on the rear brake, its ment to be bent as the caliper is offset from the swingarm. __________________ OTR: KTM 690 Duke R 2015 Full Akro SIDELINE: Kwak ZX636 A1P 2002, Red, R&G's, Yoshi, Double Bubble Screen GONE: Kwak ZX-7R P1, Full Akro, Undertray, Screen GONE: SV650S K2 Very Bruised & Without Fairing, Motovation Frame Sliders, R&G Ally Sprocket Toe Protector, HEL 2 Line Setup, GSXR K1 600 RWU Forks, Barnett Clutch & Springs, Penske 8981 Shock, Gilles Ti Rearsets, Steel Barends, Scottoiler, AFAM Chain & Sprockets, Twin FIAMM Horns, Skidmarx Bellypan, Full Micron Zeta Steel System, Cut down undertay. Forum Problems & Information / Site Suggestions

13-02-06, 03:00 PM	#4
w.steele Guest Posts: n/a	bent fingy TSM - thats what i ment, no.....really it is

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Bent exhaust	lukewalton	SV Talk, Tuning & Tweaking	5	04-01-08 02:04 PM
Bent rim!	phil24_7	Bikes - Talk & Issues	18	01-11-07 02:51 PM
Are my forks bent?	Stu	SV Talk, Tuning & Tweaking	12	13-06-06 02:47 PM
wheel bent!	socommk23	SV Talk, Tuning & Tweaking	2	31-05-06 10:43 PM
Bent Forks... how much is too much?	WhiteRabbit	SV Talk, Tuning & Tweaking	1	13-11-04 01:09 AM

13-02-06, 03:26 PM	#5
wtdafk Guest Posts: n/a	yea thats the one, thanks i jus thaught that it looks like sum1 has gone in to the back of the bike n bent it up, cheers for the help glad it supposed to b like that