Clutch drag? Wheel spins when clutch pulled in. - SV650.org

01-06-12, 08:07 PM

hi, ive just done a handle bar conversion, trying to adjust the clutch cable but cant stop the rear wheel spinning with the clutch lever pulled in. any ideas?

DJ123 · 01-06-12, 08:21 PM

iirc it will spin clutch pulled in or not. why is it a problem?

maviczap · 01-06-12, 08:32 PM

Do you mean that it won't stop with the engine running?

Mine won't do this when its on the stand, but when the wheel is on the ground, clutch works as normal

Have you set the worm drive screw properly? Check the worm drive mechanism behind the sprocket cover is moving when you're pulling the clutch lever

01-06-12, 08:36 PM

That's interesting that it won't stop when on a stand. I was more concerned about this than setting the rest of the adjustments

02-06-12, 03:43 PM

Well that's better, its all as normal when the bike is on 2 wheels, just to check the next thing, when the bike is started should you still hear a faint sound like the initial fuel pump prime sound?
In gear, ignition on clucth out, should the pump prime on not? Thinking not when its in gear

yorkie_chris · 02-06-12, 03:54 PM

It should prime, but you shouldn't be able to start it.

Quote:

Originally Posted by frankie77

Well that's better, its all as normal when the bike is on 2 wheels,

That's fine then.

DJ123 · 02-06-12, 06:46 PM

no, it won't prime unless clutch is pulled in or the bike is in neutral

01-06-12, 08:07 PM	#1
frankie77 Guest Posts: n/a	Clutch drag? Wheel spins when clutch pulled in. hi, ive just done a handle bar conversion, trying to adjust the clutch cable but cant stop the rear wheel spinning with the clutch lever pulled in. any ideas?

01-06-12, 08:21 PM	#2
DJ123 Member Mega Poster Join Date: Jul 2011 Location: Somewhere over there Posts: 3,245	Re: ahhhhhhh iirc it will spin clutch pulled in or not. why is it a problem? __________________ BMW F800ST

01-06-12, 08:32 PM	#3
maviczap Member Mega Poster Join Date: Mar 2007 Posts: 9,097	Re: ahhhhhhh Do you mean that it won't stop with the engine running? Mine won't do this when its on the stand, but when the wheel is on the ground, clutch works as normal Have you set the worm drive screw properly? Check the worm drive mechanism behind the sprocket cover is moving when you're pulling the clutch lever __________________ We're riding out tonight to case the promised land Make everyday count RIP Reeder - Jolly Green Giant and comedy genius

01-06-12, 08:36 PM	#4
frankie77 Guest Posts: n/a	Re: ahhhhhhh That's interesting that it won't stop when on a stand. I was more concerned about this than setting the rest of the adjustments

02-06-12, 03:43 PM	#5
frankie77 Guest Posts: n/a	Re: Clutch drag? Wheel spins when clutch pulled in. Well that's better, its all as normal when the bike is on 2 wheels, just to check the next thing, when the bike is started should you still hear a faint sound like the initial fuel pump prime sound? In gear, ignition on clucth out, should the pump prime on not? Thinking not when its in gear

02-06-12, 06:46 PM	#7
DJ123 Member Mega Poster Join Date: Jul 2011 Location: Somewhere over there Posts: 3,245	Re: Clutch drag? Wheel spins when clutch pulled in. no, it won't prime unless clutch is pulled in or the bike is in neutral __________________ BMW F800ST

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Clutch Drag.	StitchSV	SV Talk, Tuning & Tweaking	9	28-03-12 06:34 PM
Clutch drag.	bengodden	SV Talk, Tuning & Tweaking	4	08-01-11 12:21 AM
Clutch drag.	vtwinthunder	SV Talk, Tuning & Tweaking	8	10-09-10 11:52 AM
clutch drag - how much it to much	barwel1992	SV Talk, Tuning & Tweaking	3	04-06-10 06:06 PM
Cut out when clutch pulled in	andyb	SV Talk, Tuning & Tweaking	11	06-03-07 01:19 PM