SV650.org - SV650 & Gladius 650 Forum



Idle Banter For non SV and non bike related chat (and the odd bit of humour - but if any post isn't suitable it'll get deleted real quick).
There's also a "U" rating so please respect this. Newbies can also say "hello" here too.

Reply
 
Thread Tools
Old 02-04-12, 08:46 AM   #1
Nobbylad
Member
Mega Poster
 
Nobbylad's Avatar
 
Join Date: Jun 2008
Location: West Lancs
Posts: 4,055
Default Spannering in West Yorkshire

Big thanks to our very own YC for sorting my bike for the most part of yesterday.

Did a great job of sorting new chain & sprockets, rear tyre, fork springs/oil.

Although it took most of the day, he did a great job and didn't even charge me for the couple of hours kip he had in the afternoon

I was particularly impressed with his 'workshop' (aka garage), which, although it's still a gargantuan task to get up the drive once you're down...it actually resembles a workshop as opposed to a war zone. There was even a clean work surface (well, it is stainless so difficult for him to make it look as scabby as his bike lol).

Thanks again Chris - you did a great job!

(P.S. If you ever round off any bolts and need them drilling out with precision, Chris is the man)
Nobbylad is offline   Reply With Quote
Old 02-04-12, 11:21 AM   #2
joshwalker094
Member
Mega Poster
 
joshwalker094's Avatar
 
Join Date: Jul 2011
Location: manchester
Posts: 1,091
Default Re: Spannering in West Yorkshire

Good to know that he can spanner, i too shall be hiring Chris for a day to do my forks, just trying to get my funds together now
__________________
RIP Reeder
Sv650 sk6 Candy neapolian blue 33BHP club
Quote:
Originally Posted by Reeder View Post
Josh Walker sounds quite an epic name to be honest.
Quote:
Originally Posted by Reeder View Post
JOSH WALKERRRRRRRRRRRR


joshwalker094 is offline   Reply With Quote
Old 02-04-12, 11:30 AM   #3
Nobbylad
Member
Mega Poster
 
Nobbylad's Avatar
 
Join Date: Jun 2008
Location: West Lancs
Posts: 4,055
Default Re: Spannering in West Yorkshire

Do it Josh, Chris has been kind enough to ride over to mine in the past to help me with stuff (sometimes after having worked at DP's too).

Now he's doing this 'properly' i.e. charging a fair rate for his work, I'm more comfortable about the arrangement as I'd feel a bit guilty continuing to use him for 'free' (i.e. whisky).

I'll be back again in the next few weeks to get him to swap my cams, I could do it myself, but based on yesterday's experience, having a workshop full of the right kit (air gun, proper steel drill bits - various sizes) is worth it's weight in gold when things go Pete Tong (as they always do with easy jobs).
Nobbylad is offline   Reply With Quote
Old 03-04-12, 05:55 PM   #4
missyburd
Guest
 
Posts: n/a
Default Re: Spannering in West Yorkshire

Bump/Plug
  Reply With Quote
Old 03-04-12, 07:22 PM   #5
dizzyblonde
Da Cake Boss
Mega Poster
 
dizzyblonde's Avatar
 
Join Date: May 2007
Location: On a flying Horse
Posts: 9,992
Default Re: Spannering in West Yorkshire

Yes the oily git struck again yesterday......cheeky sod.....wait for it.......




Got me out of bed at 7.50am with a phonecall to announce he would be up in an hour to refit my new tank

Then stayed around for a half hr and fooked off when he had to soak this rubber thing coz it wouldn't fit over the pump.......

A few hours later and me tappin me foot coz he had the cheek to get me up so early, he came back, and the pump had shrunk, or the rubber thing had stretched, muchos slagging off about tanks made on a Friday are all different sizes in Italy........and my new tank is firmly on after some faffing
No more chicken pox

We have also found that you can remove the tank without taking off the horns, to change the air filter, indeed a handy thing to have taken note of young Chris, for when those poxy bolts holding them on want to stay on, going round and round and round and round

I as always am happy when hes gone, usually coz hes snaffled all me hobnobs, left blobs of oil on my carpet and the bogseat up....and occasionally because hes done a good job
__________________
Suzy, yellow 2001 SVS. Kitty, V-Raptor 1000, ZZR1400<<its my bike now Pegasus!

Hovis 13.8.75-3.10.09 Reeder 20.7.88-21.3.12

Last edited by dizzyblonde; 03-04-12 at 07:23 PM.
dizzyblonde is offline   Reply With Quote
Old 03-04-12, 08:49 PM   #6
AndyBrad
Guest
 
Posts: n/a
Default Re: Spannering in West Yorkshire



just to note though lou that the seat should be up as you have gravity to help you close it, us blokes have to fight nature to lift it up. As good a reason as any i say
  Reply With Quote
Old 03-04-12, 10:55 PM   #7
Winder
Member
 
Winder's Avatar
 
Join Date: Mar 2011
Location: Moved again now in Bracknell
Posts: 981
Default Re: Spannering in West Yorkshire

We need a CC (Cockney Chris) down here.
__________________
"Somewhere between happy and total f**kin wreck"
Winder is offline   Reply With Quote
Old 04-04-12, 08:27 AM   #8
Nobbylad
Member
Mega Poster
 
Nobbylad's Avatar
 
Join Date: Jun 2008
Location: West Lancs
Posts: 4,055
Default Re: Spannering in West Yorkshire

Isn't Spannerman located darn sarf?
Nobbylad is offline   Reply With Quote
Old 04-04-12, 08:46 AM   #9
Winder
Member
 
Winder's Avatar
 
Join Date: Mar 2011
Location: Moved again now in Bracknell
Posts: 981
Default Re: Spannering in West Yorkshire

He is down here mate and everyone highly recommends him.
But i heard a rumour that YC can fix a curvy just by swearing at it?
__________________
"Somewhere between happy and total f**kin wreck"
Winder is offline   Reply With Quote
Old 04-04-12, 10:08 AM   #10
missyburd
Guest
 
Posts: n/a
Default Re: Spannering in West Yorkshire

Quote:
Originally Posted by Winder View Post
But i heard a rumour that YC can fix a curvy just by swearing at it?
Some say SV650s shrink away from his oily hammer...
  Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
West Yorkshire Police tactcom7 Idle Banter 0 10-10-10 01:08 PM
Trackday near in or around West Yorkshire? radicalry00 Pennine Massive 11 03-09-09 12:56 PM
WANTED SV650 in West Yorkshire Owenski Stuff Wanted 11 28-03-09 03:30 PM
Mig Welding in West Yorkshire Paul the 6th Idle Banter 12 18-01-08 05:32 PM
BikeSafe - West Yorkshire 2007 pmapp Pennine Massive 4 07-01-07 08:00 PM


All times are GMT. The time now is 02:47 PM.


Powered by vBulletin® - Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.