Bikes - Talk & Issues Newsworthy and topical general biking and bike related issues. No crapola! Need Help: Try Searching before posting |
|
Thread Tools |
23-09-11, 05:39 PM | #1 |
Guest
Posts: n/a
|
Chain fitting advice?
Hi Guys,
Could I get your advice please? I have a new chain and sprocket set - I am happy taking everything apart and putting the new ones on, however I don't have a chain riveting tool. The local garage is 100m away and offered to do it for about £6. Question is - in what state do I take the bike down there? At the moment (to save time so that when I arrive they just have to rivet), I'm thinking change the sprockets, put the new chain on and put the master link through (but not the side plate) and then try and wheel it down. Is this unsafe/could I knacker the new chain? If so, I guess I could wheel it down there with no chain after changing the sprockets and then thread the chain through? Cheers, Alex. PS - I'm trying to save myself the £35 quid to buy a tool I'll use once. And I'm not confident enough yet that I wouldn't create a tight spot by using the tool incorrectly. Also - is it illegal to push a bike on the pavement?! |
23-09-11, 06:02 PM | #2 |
Guest
Posts: n/a
|
Re: Chain advice
I bought a used a clip link, i was gonna get it rivetted but have never got round to changing it. I always hammer it away from lights too, its been fine.
|
24-09-11, 08:40 AM | #3 |
Guest
Posts: n/a
|
Re: Chain advice
Walk it down with the chain off. Clip link will be fine too.
Another alternative is to take the chain down without the bike and have it riveted. Pull the swing arm out to service the often neglected bearings and put the chain in while re-assembling the swing arm. |
24-09-11, 08:43 AM | #4 | |
Guest
Posts: n/a
|
Re: Chain advice
Quote:
At the moment I'm leaning towards walking it down with the chain off. Which will involve temporarily putting in on to enable me to use the back brake method to tighten up the front sprocket, then take it back off again |
|
24-09-11, 07:14 PM | #5 | |
Member
Mega Poster
Join Date: Feb 2006
Location: Wellington, New Zealand
Posts: 2,460
|
Re: Chain advice
Quote:
__________________
#24 - Honda VFR400R NC30
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Help - fitting cam chain tensioner. | hardhat_harry | SV Talk, Tuning & Tweaking | 13 | 03-03-12 11:42 AM |
When fitting a new chain... | DarrenSV650S | Bikes - Talk & Issues | 52 | 15-09-09 07:52 PM |
Chain fitting query.. | 3MM | SELKENT | 0 | 24-12-08 05:44 PM |
Chain fitting help | pencil shavings | SV Talk, Tuning & Tweaking | 2 | 14-10-08 08:58 PM |
Question on chain fitting | Tony_BLY | SV Talk, Tuning & Tweaking | 9 | 23-11-04 02:59 PM |