Rear calliper toque arm - SV650.org

26-05-06, 01:20 PM

Can you get one in s/steel or aluminium for a curvey because i'm sick of having to repaint mine every year after riding through winter!!!!!!

26-05-06, 01:23 PM

From memory I think the TLS bolt right on and they were ally, or try making one look at the dog bone post for an idea - nice bit of thick walled stainless tube a couple of bends and two threaded fork ends, don't forget lock nuts.

26-05-06, 05:07 PM

TLS, TLR 'busa or the SRAD GSXR, all fit.

26-05-06, 06:05 PM

Quote:

Originally Posted by BILLY

Can you get one in s/steel or aluminium for a curvey because i'm sick of having to repaint mine every year after riding through winter!!!!!!

Could you not just get it powder coated or ceramiced? Or would the bolts rub through it?

northwind · 26-05-06, 06:46 PM

Bolts'll rub through it in time, unless you're very careful with washers. TL1000/SRAD arm, takes minutes to fit. Can't remember exactly what it took, I think I drilled out one hole in order to use the SV bolts, and packed a couple of washers along a bolt.

26-05-06, 07:23 PM

Thanfs everyone a TLS/SRAD one it is then I'll have a look on Ebay

27-05-06, 01:47 PM

I bought a TLR torque arm. Do they fit? The one I have is too narrow at one end to fit over the Swingarm end. Maybe its not a TLR arm after all, but alloy and very light though!

26-05-06, 01:20 PM	#1
BILLY Guest Posts: n/a	Rear calliper toque arm Can you get one in s/steel or aluminium for a curvey because i'm sick of having to repaint mine every year after riding through winter!!!!!!

26-05-06, 06:46 PM	#5
northwind Moderator Mega Poster Join Date: Jan 2004 Location: In the garage where I belong Posts: 17,082	Bolts'll rub through it in time, unless you're very careful with washers. TL1000/SRAD arm, takes minutes to fit. Can't remember exactly what it took, I think I drilled out one hole in order to use the SV bolts, and packed a couple of washers along a bolt. __________________ "We are the angry mob, we read the papers every day We like what we like, we hate what we hate But we're oh so easily swayed"

27-05-06, 01:47 PM	#7
Michael S Guest Posts: n/a	Are we sure I bought a TLR torque arm. Do they fit? The one I have is too narrow at one end to fit over the Swingarm end. Maybe its not a TLR arm after all, but alloy and very light though!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
calliper brackets help	svtomo	SV Talk, Tuning & Tweaking	0	31-03-09 04:51 PM
Calliper pistons...where from?	Stig	SV Talk, Tuning & Tweaking	8	10-06-08 06:34 PM
'How to' change the calliper seals	Aidan	SV Talk, Tuning & Tweaking	35	26-01-08 04:30 PM
Broken rear brake calliper bracket!	mitchbligh	SV Talk, Tuning & Tweaking	7	19-06-06 03:42 PM
Rear calliper pins needed	Stig	SV Talk, Tuning & Tweaking	7	05-04-05 12:28 PM

26-05-06, 01:23 PM	#2
John Burt Guest Posts: n/a	From memory I think the TLS bolt right on and they were ally, or try making one look at the dog bone post for an idea - nice bit of thick walled stainless tube a couple of bends and two threaded fork ends, don't forget lock nuts.

26-05-06, 05:07 PM	#3
Razor Guest Posts: n/a	TLS, TLR 'busa or the SRAD GSXR, all fit.

26-05-06, 07:23 PM	#6
BILLY Guest Posts: n/a	Thanfs everyone a TLS/SRAD one it is then I'll have a look on Ebay