My **** - tail tidy - SV650.org

Wideboy · 02-02-08, 06:28 PM

ok so today i started work on making my own tail tidy and under tray and this is how far i am at the moment.

i am at this minute waiting for the primer to go off then i will spray them, assemble the tail tidy, bolt or rivet (mind not made up yet) it to the under tray and wire up the indy's and all will be done

yorkie_chris · 02-02-08, 06:29 PM

Cool.

Richie · 02-02-08, 06:31 PM

Good work there.
post some photos of the item when finished.

Rich · 02-02-08, 06:38 PM

Looking damb good i must say. Make a few and sell them. People on here are always asking for them.

fizzwheel · 02-02-08, 06:48 PM

Nice job

chris8886 · 02-02-08, 06:52 PM

i may even make my way down to you so you can fit it for me!!

Wideboy · 02-02-08, 06:52 PM

Quote:

Originally Posted by Richie

Good work there.
post some photos of the item when finished.

will do

Quote:

Originally Posted by fizzwheel

Nice job

tar very much

Quote:

Originally Posted by 1RichSV650

Looking damb good i must say. Make a few and sell them. People on here are always asking for them.

the making it isn't the hard part, its the cutting away of the plastic on the bike

Quote:

Originally Posted by yorkie_chris

Cool.

your turn

just added final coat of paint so will go and finish it in about a hour, just held the number plate up to it and its mahoosive lol i will be getting me dad to make me up a slightly smaller one

Wideboy · 02-02-08, 06:54 PM

Quote:

Originally Posted by chris8886

i may even make my way down to you so you can fit it for me!!

LOL! don't think i want to be doing it again though, i made a slight balls up when cutting away the plastics and i have a 5mm gap but its not noticeable from the outside so i will put a bit of fibreglass over it from the inside

Wideboy · 02-02-08, 09:03 PM

ah will finish it tomorrow, have missed a bit when i was spraying so i have to give it another coat

wait until tomorrow me thinks

02-02-08, 10:34 PM

Nice job mate, I think I'll have to do this to mine at some point

02-02-08, 06:28 PM	#1
Wideboy Evel Knievel Mega Poster Join Date: Jun 2007 Location: Eastleigh Posts: 4,641	My - tail tidy ok so today i started work on making my own tail tidy and under tray and this is how far i am at the moment. i am at this minute waiting for the primer to go off then i will spray them, assemble the tail tidy, bolt or rivet (mind not made up yet) it to the under tray and wire up the indy's and all will be done __________________ 05 DRZ400E RIP hovis

02-02-08, 06:29 PM	#2
yorkie_chris Noisy Git Mega Poster Join Date: Apr 2007 Location: Halifax/Leeds Posts: 26,645	Re: My - tail tidy Cool. __________________ Currently Ex Biker Now rebuilding a 63' fishing trawler as a dive boat

02-02-08, 06:31 PM	#3
Richie fantabulas Mega Poster Join Date: Apr 2004 Location: Nr Durham Posts: 4,940	Re: My - tail tidy Good work there. post some photos of the item when finished. __________________ My Flickr photos

02-02-08, 06:38 PM	#4
Rich Member Mega Poster Join Date: Nov 2006 Posts: 1,089	Re: My - tail tidy Looking damb good i must say. Make a few and sell them. People on here are always asking for them. __________________ RIP Hovis - Unlucky Boyo

02-02-08, 06:48 PM	#5
fizzwheel Super Moderator Mega Poster Join Date: Dec 2003 Location: Somerset Posts: 3,614	Re: My - tail tidy Nice job __________________ Look Dave, I can see you're really upset about this. I honestly think you ought to sit down calmly, take a stress pill, and think things over. K5 GSXR 750 Anniversary Edition

02-02-08, 06:52 PM	#6
chris8886 Member Mega Poster Join Date: Oct 2006 Location: Hertfordshire Posts: 2,797	Re: My - tail tidy i may even make my way down to you so you can fit it for me!! __________________ AR08 to AR13-QUALITY! 650s: '52 curvy in yellow, was my baby cbr600rr: Mivv exhaust and a bagster tank cover. Now gone to a new home. Daytona 675: Arrow can (with a baffle that's gone missing in action....), quickshifter, shorty levers, custom paintjob

02-02-08, 09:03 PM	#9
Wideboy Evel Knievel Mega Poster Join Date: Jun 2007 Location: Eastleigh Posts: 4,641	Re: My - tail tidy ah will finish it tomorrow, have missed a bit when i was spraying so i have to give it another coat wait until tomorrow me thinks __________________ 05 DRZ400E RIP hovis

02-02-08, 10:34 PM	#10
Sean_C Guest Posts: n/a	Re: My - tail tidy Nice job mate, I think I'll have to do this to mine at some point

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Curvy tail skirt or tail tidy	mouldy	Stuff Wanted	3	21-02-09 12:49 PM
Tail Tidy	Kaikoura	SV Talk, Tuning & Tweaking	12	13-09-08 12:19 AM
tail tidy joy!	kwak zzr	Bikes - Talk & Issues	21	12-08-08 09:38 AM
Tail Tidy. Tail Tidy...Sell me your Tail Tidy....	1world2wheels	Stuff Wanted	7	15-07-06 10:09 AM
k4 tail tidy	joe650s	SV Talk, Tuning & Tweaking	4	24-01-06 09:09 AM