Handlebar conversion - Page 2 - SV650.org

DamoK4 · 22-12-20, 10:09 AM

Brilliant. Thanks for all the help. I will be ordering the ABM yoke if the delivery is quicker.

Adam Ef · 22-12-20, 04:10 PM

Get some good drill bits too for removing your ignition from the old yoke. The bolts are likely fixed in with red loctite.

graham04 · 23-12-20, 10:43 AM

https://ibb.co/6gYMkr3

Did this on the cheap, second hand top yoke from fleabay £25 ( kept my original untouched ), pair of clamps £7 and second hand jota bars £30.
Carefully drilled the yoke, added stainless penny washers to strengthen the point where clamps are bolted on . New clutch cable for naked version and braided hoses for the same.

Bibio · 23-12-20, 02:01 PM

Damo, sent you a PM. i take it your not interested?

DamoK4 · 23-12-20, 07:42 PM

Sorry, haven’t been online I will check now

DamoK4 · 23-12-20, 07:55 PM

I am definitely interested. I've just tried to send you a PM a few times, i don't know if they sent though as they aren't in sent items but i seem to be receiving them ok

Adam Ef · 23-12-20, 10:59 PM

You need to turn on saving of sent items for them to stay in your sent box. There's an option hidden there somwhere. Otherwise you'll never have anything in your sent box.

dirtydog · 24-12-20, 09:31 AM

I did a bar conversion on my curvy using a moto-cnc top yoke, ordered it and it arrived pretty quickly

Sent from my iPhone using Tapatalk

DamoK4 · 04-01-21, 09:16 AM

Just sorting buying a full kit from Bibio. Might have to buy a garage heater and fit it myself before the new season. Bikes locked away now. Been full of snow and grit here for the last week, plenty of bikers out in it though which is brave

DamoK4 · 14-02-21, 10:40 AM

Got the full kit off Bibio including the bars. He’s a top guy. Got me the screws that was missing and even threw in a security torque socket by the looks of it. Can’t really start it on Valentine’s Day or risk death so next week it is

22-12-20, 10:09 AM	#11
DamoK4 Member Join Date: Jul 2019 Location: Lancashire Posts: 134	Re: Handlebar conversion Brilliant. Thanks for all the help. I will be ordering the ABM yoke if the delivery is quicker.

22-12-20, 04:10 PM	#12
Adam Ef Member Mega Poster Join Date: Dec 2015 Location: Bristol Posts: 1,200	Re: Handlebar conversion Get some good drill bits too for removing your ignition from the old yoke. The bolts are likely fixed in with red loctite. __________________ >>> ? <<< Past: Street Triple 765rs, DRZ400s,GSXR1000 K9, VFR800 A8, ZX6R 636 2006, CRF250L, GSXR750 K7, VFR800 A7, GSXR750 L3, Street Triple 675R, MT09 Tracer, SV650s K8, CB250rsd, YBR125...

23-12-20, 10:43 AM	#13
graham04 Junior Member Join Date: Jun 2005 Location: Swansea Posts: 26	Re: Handlebar conversion https://ibb.co/6gYMkr3 Did this on the cheap, second hand top yoke from fleabay £25 ( kept my original untouched ), pair of clamps £7 and second hand jota bars £30. Carefully drilled the yoke, added stainless penny washers to strengthen the point where clamps are bolted on . New clutch cable for naked version and braided hoses for the same. Last edited by graham04; 23-12-20 at 10:44 AM.

23-12-20, 02:01 PM	#14
Bibio Member Mega Poster Join Date: Jul 2008 Location: here as devil's advocate Posts: 11,540	Re: Handlebar conversion Damo, sent you a PM. i take it your not interested?

23-12-20, 07:42 PM	#15
DamoK4 Member Join Date: Jul 2019 Location: Lancashire Posts: 134	Re: Handlebar conversion Sorry, haven’t been online I will check now

23-12-20, 07:55 PM	#16
DamoK4 Member Join Date: Jul 2019 Location: Lancashire Posts: 134	Re: Handlebar conversion I am definitely interested. I've just tried to send you a PM a few times, i don't know if they sent though as they aren't in sent items but i seem to be receiving them ok

23-12-20, 10:59 PM	#17
Adam Ef Member Mega Poster Join Date: Dec 2015 Location: Bristol Posts: 1,200	Re: Handlebar conversion You need to turn on saving of sent items for them to stay in your sent box. There's an option hidden there somwhere. Otherwise you'll never have anything in your sent box. __________________ >>> ? <<< Past: Street Triple 765rs, DRZ400s,GSXR1000 K9, VFR800 A8, ZX6R 636 2006, CRF250L, GSXR750 K7, VFR800 A7, GSXR750 L3, Street Triple 675R, MT09 Tracer, SV650s K8, CB250rsd, YBR125...

24-12-20, 09:31 AM	#18
dirtydog Knob faced knobster Mega Poster Join Date: Jan 2005 Location: Haslemere Posts: 5,419	Re: Handlebar conversion I did a bar conversion on my curvy using a moto-cnc top yoke, ordered it and it arrived pretty quickly Sent from my iPhone using Tapatalk __________________ 2001 SV650 in shimmerin green, Not broken anymore

04-01-21, 09:16 AM	#19
DamoK4 Member Join Date: Jul 2019 Location: Lancashire Posts: 134	Re: Handlebar conversion Just sorting buying a full kit from Bibio. Might have to buy a garage heater and fit it myself before the new season. Bikes locked away now. Been full of snow and grit here for the last week, plenty of bikers out in it though which is brave

14-02-21, 10:40 AM	#20
DamoK4 Member Join Date: Jul 2019 Location: Lancashire Posts: 134	Re: Handlebar conversion Got the full kit off Bibio including the bars. He’s a top guy. Got me the screws that was missing and even threw in a security torque socket by the looks of it. Can’t really start it on Valentine’s Day or risk death so next week it is

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Can i do a handlebar conversion with what ive got?	LewSpeight	SV Talk, Tuning & Tweaking	3	08-08-15 07:56 AM
Handlebar conversion	steve-sv	SV Talk, Tuning & Tweaking	2	15-01-15 01:59 AM
LSL handlebar conversion	gazza	For Sale - SV's and SV related items	0	27-04-12 06:50 PM
handlebar conversion	chamiakmako	For Sale - SV's and SV related items	0	19-05-11 03:54 PM
Handlebar conversion	SAMMY650	SV Talk, Tuning & Tweaking	21	08-03-08 03:14 PM