"Raised" clip-on bars?

"Raised" clip-on bars? Anybody come across these? Is there such a thing?
I have decided that if I could get a set with the risers 1" longer (higher) it would make a big difference to ageing wrists! (an inch makes all the difference - apparently )

Yes. Have a look for helibars, convertibars and LSL raised clip ons.

Some will require longer brake lines and possible longer throttle and clutch cables along with fairing mods. There are quite a few threads around at the moment for this sort of thing if you have a look.

What bike is it for?

Originally Posted by monkey

What bike is it for?

Thanks for that. Its an 02 "s"

That's a shame as I happen to have some LSL ones to flog. I very much doubt they'll fit yours though unless you've got non standard forks on.

Originally Posted by monkey

That's a shame as I happen to have some LSL ones to flog. I bet much doubt they'll fit yours though unless you've got non standard forks on.

Color? And height on the LSL clipons?
I have a k5 "s" will They fit?

[Shawthing]

Dont know the curvey fork diameter,but measure and
if it's 41mm (same as pointy) then look here
http://forums.sv650.org/showthread.php?t=176399

I've got Accossata clip-ons on my SV1KS which give 1" rise using all original cables, wiring and lines. It transforms the comfort - no more wrist ache at all. Plenty of other threads on this if you search.

Originally Posted by MMN

Color? And height on the LSL clipons?
I have a k5 "s" will They fit?

Please pay attention.

They won't fit if you have standard SV forks.