couple of questions

[silent11]

hi guys just bought me self a sexy SV pics to follow hehe

and have a couple of questions

first ive got a blue flame exhaust and wish to fit it but was told i have to cut it but i don't know where to cut the original so if someone could enlighten me on that thanks

also i wont to purchase some motoslider but not sure where they actually fit as its a full faired one there is a hole there with a small bracket at the back but if i remove the bracket etc and fitted the motosliders the hole doesn't line up with and of the frame mounts so i don't know how it would fit em basically, do they float or go through the frame?

thanks guys

phil

The motosliders run through the frames main engine mount bolt...

KRhall has recently done this too for the first time on his pointy, this is his pic...

Basically you need to cut 45mm back from the weld on the exhaust under the foot peg...

[fizzwheel]

I'm sure its 50mm back from the weld on the blueflame, but I can't remember and I havent got the fitting instructions for mine anymore.

Did you not get any instructions with your exhaust ? If not give Blueflame a ring and ask them.

Varies between 45mm and 50mm with the relevant companies, even the ones that use the same components and link pipes!

Try this link for info, it for a curvy but you'll get the idea if you have a pointy!

Be careful of the swing arm though, I protected mine with some carbaord - had to drink the alchoholic contents first though and yeah 45mm although I think there was plenty of leaway

[silent11]

cheers for that guys think i'll get cutting tomorrow

and looks like i''l be getting to R&G ones don't fancy drilling my fairings again