Worn floating disk buttons

[sno335]

Just to clarify, the buttons are 16mm x 4.5 mm thick
Various colours available

[Dave20046]

Originally Posted by sno335

Hi new to the forum but just some info about replacement disc buttons.Mine were badly corroded on my 2004 650.I sourced my nice aircraft aluminium ones from a company in Germany.www.performance parts.de
About €30 per disc(6) 4.5mm thickness
You need to carefully grind off the turned over bit of the old river.The new ones push in and secure with a C clip.
Apologies if this is common knowledge

Useful. thanks

[Bibio]

DONT use those replaceable buttons. if it were not for me doing about 3mph in a car park i would be dead... one of those buttons failed on me a few years ago, when it spat itself out it bent the rotor and brought me to a full stop. if it had happened 2min later i would not be here to write this warning.


BUY NEW DISCS.......... and before you say i fitted them wrong... i do know one end of a spanner from another.