SV Talk, Tuning & Tweaking Discussion and chat on all topics and technical stuff related to the SV650 and SV1000 Need Help: Try Searching before posting |
|
Thread Tools |
09-06-19, 07:10 PM | #1 |
Junior Member
Join Date: Jun 2019
Posts: 2
|
Engine replacement
Hi All,
First post here. I am looing to replace and engine in my sv650s K3 from a k4 model. Would they be compatible? ie all bolt holes line up, k4 fits in k3 frame ok? etc Cheers! |
09-06-19, 08:19 PM | #2 |
Junior Member
Join Date: Jun 2005
Location: Swansea
Posts: 26
|
Re: Engine replacement
Should be a straight swap.
|
10-06-19, 07:10 AM | #3 |
Member
Mega Poster
Join Date: May 2015
Posts: 1,237
|
Re: Engine replacement
+1 to the above. In fact, any single-spark-plug injection engine will be a straight swap in terms of frame, electrics etc - the engines did not change from the K3 to K6 models. May also be worth looking at engines from bikes that are recorded as "registered in 2007" as they could still be a single-spark K6.
In 2007 the SV got two spark plugs per cylinder, revised fuel injection etc so I'm not sure if the swap / connecting electrics would be as easy. |
12-06-19, 07:45 PM | #4 |
Junior Member
Join Date: Jun 2019
Posts: 2
|
Re: Engine replacement
Briliant, thanks for the advice.
|
Thread Tools | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Lost engine bolt, replacement? | jonnysv650s | Bikes - Talk & Issues | 2 | 27-04-13 10:50 AM |
Replacement engine - maintenance before installation? | Daveog | SV Talk, Tuning & Tweaking | 2 | 23-03-12 09:12 PM |
Can I use any carb model replacement engine? | Daveog | SV Talk, Tuning & Tweaking | 7 | 10-11-11 01:19 PM |
Blown curvy SV engine - K3> replacement possible? | Daveog | SV Talk, Tuning & Tweaking | 7 | 20-09-11 07:25 AM |
Where to buy a replacement engine? | ziva | SV Talk, Tuning & Tweaking | 9 | 25-03-10 10:02 PM |