Brake Disc Life Expectancy - SV650.org

03-11-06, 12:33 PM

Now I know it depends on how theyre used but how many miles should an average disc be good for? Looking on ebay at some SRAD ones that have done 27K and the seller says "Good, Unworn discs". Is he talking cr*p or not???

03-11-06, 12:49 PM

Well I have a set of discs at 38k, seem fine... though if they have been raced then your going to get lots more wear.

03-11-06, 01:50 PM

A better way might be to state how many sets of pads they will last.

northwind · 03-11-06, 04:24 PM

It depends entirely on the rider and the use tbh.

NedSVS · 03-11-06, 08:54 PM

If you stick with genuine Suzuki pads then a disc that is still good at 38k is probably possible; my front discs look excellent at 24k miles. I've no doubt that they wouldn't look this good if I'd run any sort of after market pad. Tried EBC on the rear and was alarmed at the wear and scoring they produced. Not saying EBC are any worse, or better, than other aftermarket pads in this respect; just saying if you want your discs to last stick with genuine Suzuki pads.

03-11-06, 10:26 PM

I am on my 3rd set of rotors in front, forst set lasted 75k, secont set got warped rather quickly, I have about 45k on the rotors that are on my bike now

my rear I am on second rotor

I have replaced my front calipers once and rear caliper twice, I go theu rear brakes quicker than front, and because I use brakes so little, my calipers seem to get gummed up afet the second set of pads, I fine that SV calipers are relatively inexpensive and it's cheaper for me to replace calipers rather than have them rebuilt

Biker Biggles · 03-11-06, 10:38 PM

Replaced a set of fronts at 69000 miles,but they were well past it by then.It really does depend on riding style and how hard the pads are.It's a bit like tyres.If you thrash them they wear out in no time.

04-11-06, 10:40 AM

Cheers Guys, just got some other discs from ebay that had less miles on (GSXR OEM ones) after the guys on another thread said that the EBC ones are rubbish!

06-11-06, 12:44 PM

As someone mentioned, I'd imagine "number of sets of pads" would be a better measurement than mileage. It depends on the pads that have been used too. Sintered pads are meant to wear discs a lot quicker.

06-11-06, 01:16 PM

Why not just ask someone to measure them?

The workshop manual lists permitted tolerances so it should be fairly easy to judge just how worn they are.

03-11-06, 12:33 PM	#1
andyb Guest Posts: n/a	Brake Disc Life Expectancy Now I know it depends on how theyre used but how many miles should an average disc be good for? Looking on ebay at some SRAD ones that have done 27K and the seller says "Good, Unworn discs". Is he talking cr*p or not???

03-11-06, 04:24 PM	#4
northwind Moderator Mega Poster Join Date: Jan 2004 Location: In the garage where I belong Posts: 17,082	It depends entirely on the rider and the use tbh. __________________ "We are the angry mob, we read the papers every day We like what we like, we hate what we hate But we're oh so easily swayed"

03-11-06, 10:38 PM	#7
Biker Biggles Member Mega Poster Join Date: Jan 2005 Location: Barnet Herts Posts: 5,069	Replaced a set of fronts at 69000 miles,but they were well past it by then.It really does depend on riding style and how hard the pads are.It's a bit like tyres.If you thrash them they wear out in no time. __________________ On a clear day we stand there and look further than the ordinary eye can see.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
life expectancy??!!	Sjbuckle83	SV Talk, Tuning & Tweaking	12	31-01-08 07:12 PM
SV 650 Life expectancy	rcmark	SV Talk, Tuning & Tweaking	8	04-08-05 05:43 PM
Life of a brake disc	BaggaZee	SV Talk, Tuning & Tweaking	3	13-04-05 12:12 PM
SV wouldn't start. What's the battery life expectancy?	RobSV	SV Talk, Tuning & Tweaking	22	20-01-05 11:15 AM
brake pad life?	Itching 2 go	SV Talk, Tuning & Tweaking	19	25-06-04 10:39 PM

03-11-06, 12:49 PM	#2
Grinch Guest Posts: n/a	Well I have a set of discs at 38k, seem fine... though if they have been raced then your going to get lots more wear.

03-11-06, 01:50 PM	#3
sdusk Guest Posts: n/a	A better way might be to state how many sets of pads they will last.

03-11-06, 08:54 PM	#5
NedSVS Member Join Date: Mar 2005 Posts: 568	If you stick with genuine Suzuki pads then a disc that is still good at 38k is probably possible; my front discs look excellent at 24k miles. I've no doubt that they wouldn't look this good if I'd run any sort of after market pad. Tried EBC on the rear and was alarmed at the wear and scoring they produced. Not saying EBC are any worse, or better, than other aftermarket pads in this respect; just saying if you want your discs to last stick with genuine Suzuki pads.

03-11-06, 10:26 PM	#6
RandyO Guest Posts: n/a	I am on my 3rd set of rotors in front, forst set lasted 75k, secont set got warped rather quickly, I have about 45k on the rotors that are on my bike now my rear I am on second rotor I have replaced my front calipers once and rear caliper twice, I go theu rear brakes quicker than front, and because I use brakes so little, my calipers seem to get gummed up afet the second set of pads, I fine that SV calipers are relatively inexpensive and it's cheaper for me to replace calipers rather than have them rebuilt

04-11-06, 10:40 AM	#8
andyb Guest Posts: n/a	Cheers Guys, just got some other discs from ebay that had less miles on (GSXR OEM ones) after the guys on another thread said that the EBC ones are rubbish!

06-11-06, 12:44 PM	#9
Ceri JC Guest Posts: n/a	As someone mentioned, I'd imagine "number of sets of pads" would be a better measurement than mileage. It depends on the pads that have been used too. Sintered pads are meant to wear discs a lot quicker.

06-11-06, 01:16 PM	#10
Mike1234 Guest Posts: n/a	Why not just ask someone to measure them? The workshop manual lists permitted tolerances so it should be fairly easy to judge just how worn they are.