SV Talk, Tuning & Tweaking Discussion and chat on all topics and technical stuff related to the SV650 and SV1000 Need Help: Try Searching before posting |
|
Thread Tools |
04-04-21, 05:38 AM | #1 |
Junior Member
Join Date: Apr 2021
Posts: 3
|
What have I done?
Hi ,I'm new to this forum so hello to everyone.
My problem is that I just changed the chain and sprockets on my 1999 curvy. To get to the front sprocket I had to move the clutch actuator and now have no drive. On the paddock stand all gears can be selected and there is drive but back on the floor there is very limited drive i.e about 1mph at 4,000 rpm. What have I broken??? |
04-04-21, 06:31 AM | #2 |
Member
Join Date: Nov 2007
Location: Preston
Posts: 652
|
Re: What have I done?
You just need to adjust the clutch.
This thread tells you how. https://r.tapatalk.com/shareLink/top...ink_source=app The pictures are long gone but the same thread further along has a link to the workshop manual pictures to make sense of it all. Sent from an S20 using Tapatalk with that kin cr4p blocked
__________________
Formerly known as Gajjii Previous Bikes: Red Sk1 Curvy, Red MT-07. Current Bike: Black MT-09. |
04-04-21, 07:22 AM | #3 |
Junior Member
Join Date: Apr 2021
Posts: 3
|
Re: What have I done?
Thanks very much. I'll have a look now.
|
04-04-21, 08:31 AM | #4 |
Member
Join Date: Nov 2007
Location: Preston
Posts: 652
|
Re: What have I done?
If the manual link doesn't work pm me your number and I'll WhatsApp a copy over.
The relevant bit from the manual. Although (more experienced than me) advice is to back off 1/8 of a turn. Sent from an S20 using Tapatalk with that kin cr4p blocked
__________________
Formerly known as Gajjii Previous Bikes: Red Sk1 Curvy, Red MT-07. Current Bike: Black MT-09. |
05-04-21, 11:35 AM | #5 |
Junior Member
Join Date: Apr 2021
Posts: 3
|
Re: What have I done?
Thanks again. All seems ok for now.
|
|
|