Bikes - Talk & Issues Newsworthy and topical general biking and bike related issues. No crapola! Need Help: Try Searching before posting |
![]() |
|
Thread Tools |
![]() |
#1 |
Member
Mega Poster
Join Date: May 2015
Posts: 1,257
|
![]()
I last changed the brake fluid on my 2017 Gen 3 (with ABS) in December 2021. Yesterday I thought I'd check the condition of the fluid out of curiosity. The moisture level was still below 1%, which is still well on the safe side. The fluid is just Comma DOT4 (£6 a litre from the local motor factors), nothing special.
I do around 11 to 12K miles per year on the bike and while it is garaged, the garage is not heated and is a bit draughty. It shows that in the UK climate, even basic brake fluid can last well beyond the usual recommendation to change / flush every 2 years. |
![]() |
![]() |
![]() |
#2 |
Member
Mega Poster
Join Date: Jul 2008
Location: here as devil's advocate
Posts: 11,541
|
![]()
i've services bikes where the fluid has been black and the brakes still worked perfect. i personally think its the manufacturers covering their behind or its just to sell more fluid.
|
![]() |
![]() |
![]() |
#3 |
Member
Mega Poster
Join Date: May 2015
Posts: 1,257
|
![]()
I think in some climates with high humidity / high temperatures, brake fluid will go off quickly ... but not in the UK!
|
![]() |
![]() |
![]() |
#4 |
Member
Join Date: Oct 2007
Posts: 548
|
![]()
I do like the flexible rubber seal used in motorcycle master cylinders and I think this helps keep the fluid dry compared with cars which in general just have an vent open to atmosphere to allow for changes in fluid level...
|
![]() |
![]() |
![]() |
#5 |
John T
Mega Poster
Join Date: May 2003
Location: Shrewsbury, Shrops, UK
Posts: 2,486
|
![]()
I changed the fluid in my VFR every two years. I could see the fluid going darker as it aged. I could definitely feel the difference after changing. Also ABS pumps don't like moisture and can corrode, simpler to change fluid than a frozen ABS unit.
Sent from my SM-T510 using Tapatalk
__________________
Admin for this forum and the main site. John@sv650.org |
![]() |
![]() |
![]() |
#6 |
Member
Join Date: Jan 2019
Location: N W Leicestershire
Posts: 258
|
![]()
My mechanic, if I suggested a brake fluid change on the car would ask 'why'
|
![]() |
![]() |
![]() |
#7 |
Member
Join Date: Oct 2007
Posts: 548
|
![]()
My SV was completely underwater for more than 5 days so I changed the brake fluid but probably didnt need to...
|
![]() |
![]() |
![]() |
#8 | |
Member
Mega Poster
Join Date: Nov 2016
Location: Shropshire UK
Posts: 1,363
|
![]() Quote:
Automotive brake fluid reservoirs have a vent in the actual lid, but below the lid is a flexible membrane that has a collar ( sometimes pressed down by the lid to seal better) that is a tight fit in the neck of the reservoir and the membrane will allow level in reservoir to rise or fall while sealing the fluid from the atmosphere... The pinhole vent in the actual lid is just to allow the air above the flexible membrane to equalise and not build up pressure or vacuum as the membrane does its job. I have had a MityVac for may years and bleed the brakes on our cars and bikes about every 3 years. The MityVac makes it super easy to vacuum bleed the brakes - vacuum bleeding means that any air bubbles in the system will grow a lot larger under vacuum and be easier to suck out, and as long as you keep the vacuum on as you retighten the bleed nipple any remaining air bubbles will be massively reduced in size when subject to atmospheric pressure. https://www.amazon.co.uk/Mityvac-MV8...dp/B00265M9SS/
__________________
2016 SV650 AL7 Courage is resistance to fear, mastery of fear, not absence of fear - Mark Twain Last edited by SV650rules; 23-03-24 at 04:52 PM. |
|
![]() |
![]() |
![]() |
#9 | |
Member
Mega Poster
Join Date: Nov 2016
Location: Shropshire UK
Posts: 1,363
|
![]() Quote:
Agreed, flushing out old fluid is just good maintenance practice, and can prevent much more expensive problems happening. I have used a MityVac for many years now and it makes brake flushing super easy and clean, and a proper 'one man' job, even on cars.
__________________
2016 SV650 AL7 Courage is resistance to fear, mastery of fear, not absence of fear - Mark Twain |
|
![]() |
![]() |
![]() |
#10 | |
Member
Join Date: Oct 2007
Posts: 548
|
![]() Quote:
|
|
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
DOT 5 Brake Fluid | DJ123 | SV Talk, Tuning & Tweaking | 4 | 04-08-11 09:14 AM |
Is this brake fluid okay for the SV? | Scythe92 | SV Talk, Tuning & Tweaking | 8 | 29-03-11 11:13 AM |
Brake Bleed nipple/Mityvac/Brake Fluid query | Ceri JC | SV Talk, Tuning & Tweaking | 15 | 20-01-09 02:04 PM |
Brake Fluid & Oil | krhall | Bikes - Talk & Issues | 6 | 20-12-06 12:58 AM |
Brake fluid | Trix | SV Talk, Tuning & Tweaking | 14 | 20-01-05 11:13 AM |