K3 wiring diagram

Anyone got one? Cheers.

[husky03]

http://bolty.net/wp-content/uploads/...lor_wiring.jpg

try this one Si

[DarrenSV650S]

Can send you full size ones if you want

Originally Posted by husky03

http://bolty.net/wp-content/uploads/...lor_wiring.jpg

try this one Si

Thanks I have that one but there seems to be an error on it. The clock I have has a red wire coming from it. There are no red wires shown on that diagram coming from the clocks.

Originally Posted by DarrenSV650S

Can send you full size ones if you want

Cool I will PM you.

I am confused still.

I have a red wire coming out of the clocks but there isn't one shown in the diagram. There are other differences as well. Yellow black I dont have but I do have a Black Yellow.

I also have a red black wire but again this is not shown in the wiring diagram.

Could someone check different versions of the wiring diagram and see if those ones have the colours I have?

Thanks.

they appear in the k1 and k2 i think scanning them now and you can have a look

[DarrenSV650S]

Originally Posted by BigApe

I am confused still.

I have a red wire coming out of the clocks but there isn't one shown in the diagram. There are other differences as well. Yellow black I dont have but I do have a Black Yellow.

I also have a red black wire but again this is not shown in the wiring diagram.

Could someone check different versions of the wiring diagram and see if those ones have the colours I have?

Thanks.

Curvy clocks have what you describe

[Sid Squid]

Quite a bit got changed around when fitting your new instruments, I seem to remember arranging some extra connections to your new instruments as they need a permanent live to keep the clock alive, it's possible that the red you can't identify is that one.

What's amiss?

can give you bigger ones i think if needed mate and can get the curvy diagrams for you hth

hang on there tiny bigger ones on way