GT85

Hi
Considering using this product as an alternative to WD40.
Does anyone have any knowledge on how it differs from WD40 apart from the fact that GT85 has teflon ?
Anything you should avoid spraying it on - rubber / plastics etc
Any thoughts or should I stick to WD?

[pmapp]

Can't tell ya the differences, but I've used the stuff for years.

Just as a general lube, but its quite good at getting yer bits shiney


Oh aye, and I think it smells nicer too

Originally Posted by pmapp

Oh aye, and I think it smells nicer too

It smells like a tarts handbag!

I use it when I need a thin lube (bicycle chains, clutch lever pivot points etc...) but for general cleaning and degreasing I use WD40 as it is cheaper.....

As a slight aside, the GT85 (SG85) spray grease is ace, good for doing your linkages etc.

Dont worry about the teflon content - its (as far as anything goes) chemically inert. It's probably there to prevent the lube being washed away to easily by the rain etc, since its insoluble in water.

Matt

[BillyC]

GT85 and WD40 are not alternatives.

WD40 is a water dispersant, used for removing water, and very light oiling - after all it is an oil. However, it's so light, it can't really be used for long term lubrication - it just washes away.

GT85 is intended as a lubricant, and it's teflon content makes it particularly good at this. I would guess it's good for doing hard to reach areas like your levers and pedals.

However, areas involving plastic and rubber should use something else. Silicone based lubricants, and rubber grease can be bought for this.