heated grip - SV650.org

26-01-15, 09:08 PM

Hi All,

I have installed heated grip on my r6 and it keeps spining once it is warm.
I have tried super glue, hair spray plus super glue but nothing seems to stop the *****r from spining .

any ideas on what I should do ?

Thanks

26-01-15, 09:24 PM

I had this problem with my heated grip on the throttle side, i used unibond Extreme repair power glue which i got from B&Q of all places. It was a bit pricey if i remember but haven't had the problem since so was worth it in my eyes. It says on the tube that it resists shock/impact, water and temperatures between -50 and +120.
Hope this helps you.

26-01-15, 09:25 PM

will try it

26-01-15, 09:25 PM

I also made sure i allowed the time specified on the glue for it to set/cure properly.

26-01-15, 09:26 PM

Hello mate, when I installed mine just over a year ago I used epoxy resin and have never had a problem with them spinning

This is the exact stuff I used:
http://www.ebay.co.uk/itm/Evo-Stik-E...item2a4ae7326c

matt

26-01-15, 09:28 PM

the vo stik epoxy , I may do that as it is ebay and seems reasoble cost wise

26-01-15, 09:08 PM	#1
stranger12 Guest Posts: n/a	heated grip Hi All, I have installed heated grip on my r6 and it keeps spining once it is warm. I have tried super glue, hair spray plus super glue but nothing seems to stop the *****r from spining . any ideas on what I should do ? Thanks

26-01-15, 09:24 PM	#2
aaron020873 Guest Posts: n/a	Re: heated grip I had this problem with my heated grip on the throttle side, i used unibond Extreme repair power glue which i got from B&Q of all places. It was a bit pricey if i remember but haven't had the problem since so was worth it in my eyes. It says on the tube that it resists shock/impact, water and temperatures between -50 and +120. Hope this helps you.

26-01-15, 09:25 PM	#3
stranger12 Guest Posts: n/a	Re: heated grip will try it

26-01-15, 09:25 PM	#4
aaron020873 Guest Posts: n/a	Re: heated grip I also made sure i allowed the time specified on the glue for it to set/cure properly.

26-01-15, 09:26 PM	#5
matt220 Guest Posts: n/a	Re: heated grip Hello mate, when I installed mine just over a year ago I used epoxy resin and have never had a problem with them spinning This is the exact stuff I used: http://www.ebay.co.uk/itm/Evo-Stik-E...item2a4ae7326c matt

26-01-15, 09:28 PM	#6
stranger12 Guest Posts: n/a	Re: heated grip the vo stik epoxy , I may do that as it is ebay and seems reasoble cost wise

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Heated grip suggestions?	dirtyred619	Bikes - Talk & Issues	30	09-04-13 06:41 AM
one one heated grip. brrrr.	JohnStMartin	SV Ecosse	2	05-11-12 08:27 AM
2 heated grip questions.	sputnik	Bikes - Talk & Issues	4	29-10-11 09:17 AM
LHS Oxford heated grip	dyzio	Stuff Wanted	0	10-08-10 12:46 PM
Tucano Urbano Neoprene Hand Grip Covers - R361 OR Symtec Heated Grip Kit?	charlieferguson	SV Talk, Tuning & Tweaking	0	13-10-09 08:08 PM