K3 & pointy bits - Hastings, East Sussex - SV650.org

19-03-08, 06:49 PM

Px'ed the SV for a roulette green 1050 speed triple and now have a few spare bits for sale. Collection would be prefered.

Firstly, K3 High level Micron stainless full system and all the fittings and instructions only on the bike for a few hundred miles as was taken off for the MOT and never got round to putting it back on. Sounds amazing and ran fine without fuel injection being remaped. ?250.00

Factory pro velocity stacks (mid range). These are such a must have, mid range is fattened right up and the induction noise is as loud as a race can! I'll throw in some aluminium tank risers with these, then all you need do is de snorkle and bathe in the thunder of your SV drum kit. Again only on fitted on bike for a few hundred miles and will fit K3 onwards. These cost me well over ?90 after being clobbered by uk customs and parcel force! SOLD

K3 naked (think they should fit half faired) R & G Crash potectors. Brand new still in box, never got round to fitting them. ?77 from R&G. ?55.00

K3 naked Skidmarks carbon fibre hugger (will not fit faired but may fit later nakeds) been on the bike the bike for a few years but looks as good as ever comes with stainless fittings. Cost new is ?120.00. SOLD

OEM Suzuki K3 Silver pillion seat cover (with fit 1000's) Barely used. comes with all fixings and infills. SOLD

Also K3 SV1000 (GSXR 600/750) 4 pot calipers, mint condition - brought them with the intension of getting some mounting plates for the 650 but again never got round to it. ?60.00

Like I said earlier collection from Hastings, East Sussex would be prefered. Will post photo's as and when requested.

Thanks for looking
Leesvee

southy1978 · 19-03-08, 08:32 PM

Do you have any pics of the velocity stacks?

19-03-08, 09:02 PM

Ill have the seat cowl and bits how much posted to sheffield? and how can i pay ta Ian

19-03-08, 09:15 PM

stacks

19-03-08, 09:59 PM

here you go Ian

19-03-08, 10:21 PM

seat cowl sold

southy1978 · 19-03-08, 11:19 PM

I'll take the stacks from you. When are you available for me to collect?

19-03-08, 11:38 PM

pm for you Southy

20-03-08, 08:22 PM

Hugger now sold

Stu · 21-03-08, 07:12 PM

Lee/Southy (Anyone?) what are the stacks , how do they work & how do you fit them? (I know these are sold)

19-03-08, 06:49 PM	#1
leesvee Guest Posts: n/a	K3 & pointy bits - Hastings, East Sussex Px'ed the SV for a roulette green 1050 speed triple and now have a few spare bits for sale. Collection would be prefered. Firstly, K3 High level Micron stainless full system and all the fittings and instructions only on the bike for a few hundred miles as was taken off for the MOT and never got round to putting it back on. Sounds amazing and ran fine without fuel injection being remaped. ?250.00 Factory pro velocity stacks (mid range). These are such a must have, mid range is fattened right up and the induction noise is as loud as a race can! I'll throw in some aluminium tank risers with these, then all you need do is de snorkle and bathe in the thunder of your SV drum kit. Again only on fitted on bike for a few hundred miles and will fit K3 onwards. These cost me well over ?90 after being clobbered by uk customs and parcel force! SOLD K3 naked (think they should fit half faired) R & G Crash potectors. Brand new still in box, never got round to fitting them. ?77 from R&G. ?55.00 K3 naked Skidmarks carbon fibre hugger (will not fit faired but may fit later nakeds) been on the bike the bike for a few years but looks as good as ever comes with stainless fittings. Cost new is ?120.00. SOLD OEM Suzuki K3 Silver pillion seat cover (with fit 1000's) Barely used. comes with all fixings and infills. SOLD Also K3 SV1000 (GSXR 600/750) 4 pot calipers, mint condition - brought them with the intension of getting some mounting plates for the 650 but again never got round to it. ?60.00 Like I said earlier collection from Hastings, East Sussex would be prefered. Will post photo's as and when requested. Thanks for looking Leesvee Last edited by leesvee; 20-03-08 at 08:22 PM.

19-03-08, 08:32 PM	#2
southy1978 Member Join Date: Apr 2007 Location: Hove Posts: 86	Re: K3 & pointy bits - Hastings, East Sussex Do you have any pics of the velocity stacks?

19-03-08, 09:02 PM	#3
Ian1971 Guest Posts: n/a	Re: K3 & pointy bits - Hastings, East Sussex Ill have the seat cowl and bits how much posted to sheffield? and how can i pay ta Ian

19-03-08, 10:21 PM	#6
leesvee Guest Posts: n/a	Re: K3 & pointy bits - Hastings, East Sussex seat cowl sold

19-03-08, 11:19 PM	#7
southy1978 Member Join Date: Apr 2007 Location: Hove Posts: 86	Re: K3 & pointy bits - Hastings, East Sussex I'll take the stacks from you. When are you available for me to collect?

19-03-08, 11:38 PM	#8
leesvee Guest Posts: n/a	Re: K3 & pointy bits - Hastings, East Sussex pm for you Southy

20-03-08, 08:22 PM	#9
leesvee Guest Posts: n/a	Re: K3 & pointy bits - Hastings, East Sussex Hugger now sold

21-03-08, 07:12 PM	#10
Stu Trinity Mega Poster Join Date: Jun 2006 Location: Guildford Posts: 8,027	Re: K3 & pointy bits - Hastings, East Sussex Lee/Southy (Anyone?) what are the stacks , how do they work & how do you fit them? (I know these are sold)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
empty trailer Bushmills - Hastings	busasean	Idle Banter	0	11-05-09 06:51 PM
May day hastings ride out?	nerd	The Essex Lounge	3	01-05-09 02:48 PM
ride out 9 or 10 Feb box hill to hastings	tonyk	Rideouts & Meetings	9	30-01-08 03:00 PM
Eyeball - blue pointy M62 Jn 24 - 26 East	charlie13	Pennine Massive	1	03-07-07 09:24 AM
Pointy Bits	Last Action Pimp	For Sale - SV's and SV related items	4	07-11-06 10:01 PM