hi is there any other engins that will fit in the 650 sk ? - SV650.org

31-03-09, 08:40 PM

every 1 i spokein to say the 01 02 models r chewing cranks an so was lookin 4 a diffrent engin altogether

husky03 · 31-03-09, 08:44 PM

who you spoke to?

31-03-09, 08:47 PM

every 1 that has got an engin an even brakes all sayin cranks ****ed or badly worn

TSM · 31-03-09, 08:48 PM

Quote:

Originally Posted by thelilbigtony

every 1 that has got an engin an even brakes all sayin cranks ****ed or badly worn

what language do you speak?

TSM · 31-03-09, 08:51 PM

turn it the other way , K3+ bikes are the ones that aparently have issues with the crank

you can put a K3+ engine in a curvey frame if you want, you can either go the whole hog and put the fuel injection in, you would need loom, ecu, clocks, throttle bodies, airbox, fueltank, or you can put a K3+ engine in and just replace the flywheel from the curvey and keep the carbs

i think above is mostly correct, woops i forgot to cut the letters off the end of my words

husky03 · 31-03-09, 08:53 PM

Quote:

Originally Posted by TSM

i think above is mostly correct, woops i forgot to cut the letters off the end of my words

yo craz foo

TSM · 31-03-09, 08:54 PM

Quote:

Originally Posted by husky03

yo craz foo

looks like you need to change your keyboard, a few keys ar no wokng

31-03-09, 08:59 PM

haha soooooo funy they all work looking somthink other than an sv engin 03's spit rod just ****

husky03 · 31-03-09, 09:00 PM

31-03-09, 09:25 PM

Quote:

Originally Posted by thelilbigtony

haha soooooo funy they all work looking somthink other than an sv engin 03's spit rod just ****

Sorry

But

WHAT THE HOLY F**K

Does

That

Say?

31-03-09, 08:40 PM	#1
thelilbigtony Guest Posts: n/a	hi is there any other engins that will fit in the 650 sk ? every 1 i spokein to say the 01 02 models r chewing cranks an so was lookin 4 a diffrent engin altogether

31-03-09, 08:44 PM	#2
husky03 Member Mega Poster Join Date: Jul 2006 Location: Scotland Posts: 2,568	Re: hi is there any other engins that will fit in the 650 sk ? who you spoke to?

31-03-09, 08:47 PM	#3
thelilbigtony Guest Posts: n/a	Re: hi is there any other engins that will fit in the 650 sk ? every 1 that has got an engin an even brakes all sayin cranks ****ed or badly worn

31-03-09, 08:51 PM	#5
TSM The Sick Man Mega Poster Join Date: Nov 2004 Location: Peckham.SE.LDN Posts: 4,768	Re: hi is there any other engins that will fit in the 650 sk ? turn it the other way , K3+ bikes are the ones that aparently have issues with the crank you can put a K3+ engine in a curvey frame if you want, you can either go the whole hog and put the fuel injection in, you would need loom, ecu, clocks, throttle bodies, airbox, fueltank, or you can put a K3+ engine in and just replace the flywheel from the curvey and keep the carbs i think above is mostly correct, woops i forgot to cut the letters off the end of my words __________________ OTR: KTM 690 Duke R 2015 Full Akro SIDELINE: Kwak ZX636 A1P 2002, Red, R&G's, Yoshi, Double Bubble Screen GONE: Kwak ZX-7R P1, Full Akro, Undertray, Screen GONE: SV650S K2 Very Bruised & Without Fairing, Motovation Frame Sliders, R&G Ally Sprocket Toe Protector, HEL 2 Line Setup, GSXR K1 600 RWU Forks, Barnett Clutch & Springs, Penske 8981 Shock, Gilles Ti Rearsets, Steel Barends, Scottoiler, AFAM Chain & Sprockets, Twin FIAMM Horns, Skidmarx Bellypan, Full Micron Zeta Steel System, Cut down undertay. Forum Problems & Information / Site Suggestions

31-03-09, 08:59 PM	#8
thelilbigtony Guest Posts: n/a	Re: hi is there any other engins that will fit in the 650 sk ? haha soooooo funy they all work looking somthink other than an sv engin 03's spit rod just ****

31-03-09, 09:00 PM	#9
husky03 Member Mega Poster Join Date: Jul 2006 Location: Scotland Posts: 2,568	Re: hi is there any other engins that will fit in the 650 sk ?