![]() |
#1 |
Member
Mega Poster
Join Date: Apr 2007
Posts: 3,770
|
![]()
Well following my slight off I have been switching between thoughts of putting the bike back to standard and just riding it/sell it for something cheaper to break, or replacing broken bits with better bits and keep abusing it.
Seeing as so many bits are broken or damaged the reality is that I would struggle to sell it so have gone for option 3. So, some of the damage... ![]() ![]() ![]() ![]() ![]() It travelled that far on the R&G that there is pretty much nothing left of it but it did its jobs fairly well. ![]() At a glance the damage didnt look to bad, and to be fair all I really need to get it back on the road is some new rear sets, the list of things actually damaged is fairly extensive though. Screen - I have the standard one upper headlight fairing - Track fairing I have road ones left side fairing - Track fairing I have road ones tank cover - Track fairing I have road ones rear seat cowl - Track fairing I have road ones Left foot rest and hanger and gear changer - Bought some GBmoto rear sets Left pillion peg broke - Now removed clutch lever - usable but will need replacing tail tidy mashed - need a new one from somewhere Several bent fairing brackets - these are expensive on ebay so will try to manipulate them lol 2 new mirrors needed - I have bought 2 right hand mirrors off ebay ![]() Indicators are all abit mashed - usable but need replacing Bent exhaust - Usable just looks a bit ghey New Bar End - Will find one on ebay at some point, hopefully the clip on is ok. Helmet fairly damged - Grrr £200+ lol The two big ones are swing arm is damaged - Unfixable hence now unsellable Rear subframe twisted slightly - Expensive to replace but usable in current state I dont really have any intention of replacing damaged parts that are still usable as that would mean spending a small fortune hence I cant sell it. Current progress = Bike completely stripped and cleaned and now does not look so bad. ![]() Last edited by G; 05-12-09 at 03:52 PM. |
![]() |
![]() |
![]() |
#2 |
Member
Mega Poster
Join Date: Jul 2008
Location: Northampton
Posts: 2,218
|
![]()
How much you want for it?
__________________
Smokey Black Burnty 02 - Racetech Smoulderlators + .90kg BBQ Springs, zx10r shockingly toasted, Conti Road Attacks heat up very nicely, R&G Crash Bungs but what f**king use are they, No Colour Matched Hugger, Flame Extenda, Beowulf Titainium Oval Flame Thrower. |
![]() |
![]() |
![]() |
#3 |
Member
Mega Poster
Join Date: Apr 2007
Posts: 3,770
|
![]()
I'm keeping it
![]() |
![]() |
![]() |
![]() |
#4 |
Member
Mega Poster
Join Date: Jul 2008
Location: Northampton
Posts: 2,218
|
![]()
Dammit was hoping to get a track day bargain
![]()
__________________
Smokey Black Burnty 02 - Racetech Smoulderlators + .90kg BBQ Springs, zx10r shockingly toasted, Conti Road Attacks heat up very nicely, R&G Crash Bungs but what f**king use are they, No Colour Matched Hugger, Flame Extenda, Beowulf Titainium Oval Flame Thrower. |
![]() |
![]() |
![]() |
#5 |
Member
Mega Poster
Join Date: Jul 2008
Location: Sheffield
Posts: 10,274
|
![]()
There's not a lot wrong with it (see bent banana thread
![]() The tail tidy looked like it'd be possible to straighten out on the day. If you take the rear subby off you could see if you can straighten that out a bit.
__________________
![]() |
![]() |
![]() |
![]() |
#6 |
Member
Mega Poster
Join Date: Jul 2008
Location: Sheffield
Posts: 10,274
|
![]()
What's the damage to the swing arm? Can't quite make it out is it just a bit of abrasion?
__________________
![]() |
![]() |
![]() |
![]() |
#7 |
Guest
Posts: n/a
|
![]()
What happened?
|
![]() |
![]() |
#8 |
Member
Mega Poster
Join Date: Jul 2008
Location: Sheffield
Posts: 10,274
|
![]()
Mallory park last w/e, front end locked up at high speeds.
__________________
![]() |
![]() |
![]() |
![]() |
#9 | |
Member
Mega Poster
Join Date: Apr 2007
Posts: 3,770
|
![]() Quote:
If I wanted it to be spotless again I would have to spend a fair bit of money. Been lucky really, I had been putting off stipping it down for fear of what I would find. Biggest pains were getting the bung off as the socket end had worn away and a few nuts had ground away too. Yeah just scrapped, cotton reel thing has been ground away...not major but would stop anyone buying it as mint never been dropped, sing arms are £250 on ebay and I'm not spend that to no doubt drop it again. |
|
![]() |
![]() |
![]() |
#10 | |
Member
Mega Poster
Join Date: Jul 2008
Location: Sheffield
Posts: 10,274
|
![]() Quote:
![]() I Reckon with a bit of skill someone might be able to polish that up so it looks a lot better. I do think you've been lucky (apart from the actual crashing)
__________________
![]() |
|
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
progress of the sv | carsounds_dan | SV Talk, Tuning & Tweaking | 15 | 01-09-08 05:26 PM |
Crash.NET - Rossi: Progress at last! | NewsBot | News | 0 | 04-09-07 10:40 AM |
AR07: Progress Report: | MrMessy | 2007 Annual Rideout | 11 | 02-07-07 07:12 PM |
My DIY porting progress | svrash | SV Talk, Tuning & Tweaking | 6 | 24-01-07 12:24 AM |
My SV, a work in progress..... | Nexus242 | Photos | 4 | 23-03-06 10:25 AM |