Hel Braided Hose Help - SV650.org

27-01-10, 10:58 PM

HI i have just fitted my new hel braided hose 2 line setup to the front of my sv650s the hoses are quite long just wondering if anyone has pictures of how they have routed the lines.

5hort5 · 27-01-10, 11:26 PM

Did you do what I did ? Have you brought N lines from weemoto by picking the wrong section on their site?

5hort5 · 27-01-10, 11:26 PM

Here we go, if they look like this then they are the wrong lines

27-01-10, 11:47 PM

They look similar to that but im 100% sure i ordered the rights ones i used the hel website. Perhaps they sent me the naked version. They did forget to send me the banjo bolts for rear so possible another mistake.

5hort5 · 27-01-10, 11:49 PM

Yer possible, hopefully my new ones will be here for the weekend and then I have them fitted and take a pic for comparison. I was sure I ordered the right ones, well, that was until I was sent the order form back, my order just said SV650 lines, my new order says sv650S but they should change em without any issues.

27-01-10, 11:53 PM

K thanks looking forward to seeing the photo comparison. I will have to get on the phone and check my order.

5hort5 · 30-01-10, 11:15 AM

Well here are the brake lines fitted (lightly), they still look long but the pack says the correct lines and they are shorter than the N ones I tried last weekend. Do you reckon they should route on the inside of the throttle cables as shown or on the outside? On the outside they seem to catch on the fairing and on the inside on full lock they seem to touch the radiator?

5hort5 · 30-01-10, 04:41 PM

Anybody? Wouldn't mind tightening these up so is it right now? - Many Thanks

30-01-10, 07:21 PM

Mine route the same way yours do but they don't seem to be as long. Mine neither foul the faring, or the radiator.

5hort5 · 30-01-10, 10:37 PM

Thanks rich, these are the correct lines this time so I'm a bit lost what to do with them, I can shorten them by putting the bottom bango's out to say 45 degrees and this would shorten them enough but can I do that? would that then fail the mot or anything?

27-01-10, 10:58 PM	#1
achapman01 Guest Posts: n/a	Hel Braided Hose Help HI i have just fitted my new hel braided hose 2 line setup to the front of my sv650s the hoses are quite long just wondering if anyone has pictures of how they have routed the lines.

27-01-10, 11:26 PM	#2
5hort5 Member Join Date: May 2006 Location: Newcastle Posts: 872	Re: Hel Braided Hose Help Did you do what I did ? Have you brought N lines from weemoto by picking the wrong section on their site?

27-01-10, 11:26 PM	#3
5hort5 Member Join Date: May 2006 Location: Newcastle Posts: 872	Re: Hel Braided Hose Help Here we go, if they look like this then they are the wrong lines

27-01-10, 11:47 PM	#4
achapman01 Guest Posts: n/a	Re: Hel Braided Hose Help They look similar to that but im 100% sure i ordered the rights ones i used the hel website. Perhaps they sent me the naked version. They did forget to send me the banjo bolts for rear so possible another mistake.

27-01-10, 11:49 PM	#5
5hort5 Member Join Date: May 2006 Location: Newcastle Posts: 872	Re: Hel Braided Hose Help Yer possible, hopefully my new ones will be here for the weekend and then I have them fitted and take a pic for comparison. I was sure I ordered the right ones, well, that was until I was sent the order form back, my order just said SV650 lines, my new order says sv650S but they should change em without any issues.

27-01-10, 11:53 PM	#6
achapman01 Guest Posts: n/a	Re: Hel Braided Hose Help K thanks looking forward to seeing the photo comparison. I will have to get on the phone and check my order.

30-01-10, 11:15 AM	#7
5hort5 Member Join Date: May 2006 Location: Newcastle Posts: 872	Re: Hel Braided Hose Help Well here are the brake lines fitted (lightly), they still look long but the pack says the correct lines and they are shorter than the N ones I tried last weekend. Do you reckon they should route on the inside of the throttle cables as shown or on the outside? On the outside they seem to catch on the fairing and on the inside on full lock they seem to touch the radiator?

30-01-10, 04:41 PM	#8
5hort5 Member Join Date: May 2006 Location: Newcastle Posts: 872	Re: Hel Braided Hose Help Anybody? Wouldn't mind tightening these up so is it right now? - Many Thanks

30-01-10, 07:21 PM	#9
svrich Guest Posts: n/a	Re: Hel Braided Hose Help Mine route the same way yours do but they don't seem to be as long. Mine neither foul the faring, or the radiator.

30-01-10, 10:37 PM	#10
5hort5 Member Join Date: May 2006 Location: Newcastle Posts: 872	Re: Hel Braided Hose Help Thanks rich, these are the correct lines this time so I'm a bit lost what to do with them, I can shorten them by putting the bottom bango's out to say 45 degrees and this would shorten them enough but can I do that? would that then fail the mot or anything? Last edited by 5hort5; 30-01-10 at 10:58 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Goodridge Braided Hose Sets	SV-net	SV Talk, Tuning & Tweaking	15	25-07-08 11:29 PM
Not the usual braided hose thread	the_lone_wolf	SV Talk, Tuning & Tweaking	11	22-03-08 04:34 PM
braided hose banjo bolt question	Marksv	SV Talk, Tuning & Tweaking	2	25-08-07 08:36 PM
K&N air filter, light blue seat cowl, rear braided hose, and end can	unlucky biker	Stuff Wanted	4	25-04-07 05:55 PM
Another braided hose question	rob13	SV Talk, Tuning & Tweaking	4	24-02-07 11:00 AM