SV650.org - SV650 & Gladius 650 Forum



SV Talk, Tuning & Tweaking Discussion and chat on all topics and technical stuff related to the SV650 and SV1000
Need Help: Try Searching before posting

Reply
 
Thread Tools
Old 09-05-10, 08:33 AM   #1
dirt
Guest
 
Posts: n/a
Default Exhaust for an SFV (Gladius)?

Hi all, new member from Norway here
I just bought myself a new SFV (Gladius, but i hate the name and im not going to use it very often).
Its a great bike so far, and i like the compact style and how it handles.

Im going to do some needed modifications to it, and wonder if you can help me out.
First thing is the exhaust - the original is NOT good looking, and sound is bad to. Do you guys have any thoughts for a new exhaust? I`ve been looking at Yoshimura cans, and many looks great, but i dont know how they sound.
More and deep sound is what i want. I want my neighbour to hear me when i start it
And maybe change the catalysator to an GP style one..is it worth the money?

Next thing would be to install a rear "fender eliminator", i see there are several out there - but wich one is the best choice?

Ive been thinking about engine mods to, is it possible to squize some extra hp out of it without huge costs?

Thanks in advance for any help
  Reply With Quote
Old 09-05-10, 09:37 AM   #2
mjc
Guest
 
Posts: n/a
Default Re: SFV modifications

For the cans, Yoshi will be great, but not cheap. Cheaper options are avaliable eg Fuel, Beowulf, Scorpion. whip out the baffles and your neighbour will hate you .
Best thing to do with the cat is lose it completely, replace it with a bit of straight throuh pipe. Not sure what effect this will have on the fuelling tho, a re-mapped power commander might be necessary.
  Reply With Quote
Old 09-05-10, 02:25 PM   #3
Speedy
Member
Mega Poster
 
Join Date: Apr 2006
Location: Biggin Hill,Kent
Posts: 1,074
Default Re: Exhaust for an SFV (Gladius)?

Hi, Welcome to the Org!
I've had a look about, there does not seem to be a full system available for the Glad' yet, (if ever).

If you want to get rid of the Catalyst, you'll probably need someone to fabricate some pipe work together with an aftermarket or bespoke silencer.

With regard to the fueling issue/removal of cat', you will need to have the O2 sensor in place, or you will get a "FI" fault.

I had to have my Akrapovic system modified to accept the probe. Even the dynojet O2 sensor-eliminator couldn't fool the ECU.

Once you have a system sorted, you could either get a remap done to your existing ECU or use a Powercommander V.

Good Luck!!
Speedy is offline   Reply With Quote
Old 09-05-10, 03:48 PM   #4
dirt
Guest
 
Posts: n/a
Default Re: Exhaust for an SFV (Gladius)?

The bike at the store had a full system - i think it was Leo Vince or something, at least the can. Salesman told me he could order one for me...i`ll ask what the price is, but i dont think it will be cheap.

Do i need to use a powercomander when changing for Yoshi slip on to?
  Reply With Quote
Old 09-05-10, 04:22 PM   #5
Speedy
Member
Mega Poster
 
Join Date: Apr 2006
Location: Biggin Hill,Kent
Posts: 1,074
Default Re: Exhaust for an SFV (Gladius)?

Quote:
Originally Posted by dirt View Post
The bike at the store had a full system - i think it was Leo Vince or something, at least the can. Salesman told me he could order one for me...i`ll ask what the price is, but i dont think it will be cheap.

Do i need to use a powercomander when changing for Yoshi slip on to?
Really? A FULL system? Including pipe-work, not just the end can??

A power commander is optional. I mean, I had my ECU remapped, because at the time, I was sold a PCIII for my K9 SV....

WRONG!!! Didn't work, as the PCV wasn't available then, so due to it not working properly, I removed it and had the ECU remapped instead.

But to be honest, mine ran lovely with standard settings. Just didn't want it running too lean.

MOST after-market end cans say, "no need for remap or fuel alterations" so you should be fine.
Speedy is offline   Reply With Quote
Old 10-05-10, 08:50 AM   #6
dirt
Guest
 
Posts: n/a
Default Re: Exhaust for an SFV (Gladius)?

Quote:
Originally Posted by Speedy View Post
Really? A FULL system? Including pipe-work, not just the end can??
Actually, yes, all the way full system. And it looked much cleaner than the original..!

Thanks! I will be looking for different options. I tried to find a dealer for Scorpion, and there was only one listed in Norway - but according to their website it seems they dont sell them anymore.

What would a Scorpion muffler cost at your dealership?

Found a link to a bike in New Zealand with some mods:
http://www.motogb.co.nz/news.cfm?gid=23
Dont like the colour to much, but bike looks much better than stock.
  Reply With Quote
Old 10-05-10, 10:54 AM   #7
LorryDriver
Guest
 
Posts: n/a
Default Re: Exhaust for an SFV (Gladius)?

Hi and welcome, I have a SVF too, the yoshi cans so much better than stock, but don't expect the "wake up the neighbours" bark. the Leo Vince link pipe get some good reviews from some other forums too. for the tail tidy check out the evo-tech ones.
  Reply With Quote
Old 10-05-10, 11:03 AM   #8
dirt
Guest
 
Posts: n/a
Default Re: Exhaust for an SFV (Gladius)?

Quote:
Originally Posted by LorryDriver View Post
Hi and welcome, I have a SVF too, the yoshi cans so much better than stock, but don't expect the "wake up the neighbours" bark. the Leo Vince link pipe get some good reviews from some other forums too. for the tail tidy check out the evo-tech ones.
Thanks for the welcome.
I just ordered a tail tidy from R&G Racing from my local dealership.

Now i need to decide on the can...thinking of something like this:
Yoshi

And this looks awesome:

Last edited by dirt; 10-05-10 at 12:34 PM.
  Reply With Quote
Old 10-05-10, 04:52 PM   #9
Speedy
Member
Mega Poster
 
Join Date: Apr 2006
Location: Biggin Hill,Kent
Posts: 1,074
Default Re: Exhaust for an SFV (Gladius)?

If there is a FULL system available, I'd go for that, especially as it does away with the Catalyst!! (Bit more power!!)
Speedy is offline   Reply With Quote
Old 11-05-10, 06:17 PM   #10
dirt
Guest
 
Posts: n/a
Default Re: Exhaust for an SFV (Gladius)?

Its to damn expensive i think, at least here in Norway - and havent yet found out who makes it.
It could be a better choice to have a friend of mine weld up something totally custom, as he is an expert at building exhaust systems (have built many turbo-engines over the years).
So, until something else comes up, im about to order a Yoshimura TRC slip-on in S/S. It will do for now...
  Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Exhaust for Gladius? maclariz SV Talk, Tuning & Tweaking 1 04-05-10 12:46 PM
Gladius exhaust fits curvy? zunkus SV Talk, Tuning & Tweaking 7 09-03-10 09:09 AM
New Gladius - alternative exhaust question. benton18 SV Talk, Tuning & Tweaking 42 08-05-09 06:28 PM
All you need to know about the Gladius MCN_LiamM Pennine Massive 12 14-10-08 06:17 PM


All times are GMT. The time now is 12:01 PM.


Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.