HEL braided lines to fit sv650 (pointy) - SV650.org

Paul the 6th · 30-08-10, 12:37 PM

was having a clearout in my garage the other day and found these:

I sold a set of these when I sold my old pointy 650 so not quite sure where these have come from?

Any takers? Think they're about £55-£60 brand new so would £30 + £2 postage seem unreasonable?

30-08-10, 01:23 PM

Damn you paul! If they were for a curvy I'd have snapped these up!

Paul the 6th · 06-09-10, 08:48 AM

still for sale - 72.5 and 46cm are the lengths of the hoses when straightened out

anyone interested?

07-09-10, 10:05 AM

was going to pm you but it says its full so here it is:

hi just want to check that these will fit my 54 naked 650? if they do would you take £30 delivered? would you have any fitting instructions as they dont look the same as what is on the bike at the moment. do you know if they have been used?
thanks
ollie

Paul the 6th · 07-09-10, 10:41 AM

hiya mate - just literally cleared out some pm's this second...

these are from my old pointy 650 (05) as far as I remember. They were on the bike for about a year. The bit to the left of the photo connects to the master cylinder on your front brake lever, then the lines run down to your offside & nearside calipers - the block/splitter should mount on the offside of your front mudguard..

I don't know of a manufacturer yet who sends instructions with their brake lines but once Yorkie Chris demonstrated how to fit them & bleed the brakes I had a go at it on my sv1000 and it's quite straight forward... If you're unsure of what you're doing, stick a post out in your local regional section and I'm sure someone will give you a hand - it's not that difficult, just if you've not done it before then it can be quite daunting, especially considering the brakes are probably the most important bit of your bike

15-09-10, 12:28 PM

hi i have now no need for them as changed bars and are not long enough, back for sale by me, i did not fit them to the bike.

30-08-10, 12:37 PM	#1
Paul the 6th Member Mega Poster Join Date: Mar 2007 Location: Yorkshire Posts: 4,790	HEL braided lines to fit sv650 (pointy) was having a clearout in my garage the other day and found these: I sold a set of these when I sold my old pointy 650 so not quite sure where these have come from? Any takers? Think they're about £55-£60 brand new so would £30 + £2 postage seem unreasonable? __________________ RIP Reeder 20/07/1988 - 21/03/2012 - You were awesome Cbf600, sv650, sv1000, gsxr 750 srad, KTM adventure 950, gsxr 750 k1, gsxr 750 srad, fazer 1000, zx9r ninja..

30-08-10, 01:23 PM	#2
toby_smith Guest Posts: n/a	Re: HEL braided lines to fit sv650 (pointy) Damn you paul! If they were for a curvy I'd have snapped these up!

06-09-10, 08:48 AM	#3
Paul the 6th Member Mega Poster Join Date: Mar 2007 Location: Yorkshire Posts: 4,790	Re: HEL braided lines to fit sv650 (pointy) still for sale - 72.5 and 46cm are the lengths of the hoses when straightened out anyone interested? __________________ RIP Reeder 20/07/1988 - 21/03/2012 - You were awesome Cbf600, sv650, sv1000, gsxr 750 srad, KTM adventure 950, gsxr 750 k1, gsxr 750 srad, fazer 1000, zx9r ninja..

07-09-10, 10:05 AM	#4
AirArmed Guest Posts: n/a	Re: HEL braided lines to fit sv650 (pointy) was going to pm you but it says its full so here it is: hi just want to check that these will fit my 54 naked 650? if they do would you take £30 delivered? would you have any fitting instructions as they dont look the same as what is on the bike at the moment. do you know if they have been used? thanks ollie

07-09-10, 10:41 AM	#5
Paul the 6th Member Mega Poster Join Date: Mar 2007 Location: Yorkshire Posts: 4,790	Re: HEL braided lines to fit sv650 (pointy) hiya mate - just literally cleared out some pm's this second... these are from my old pointy 650 (05) as far as I remember. They were on the bike for about a year. The bit to the left of the photo connects to the master cylinder on your front brake lever, then the lines run down to your offside & nearside calipers - the block/splitter should mount on the offside of your front mudguard.. I don't know of a manufacturer yet who sends instructions with their brake lines but once Yorkie Chris demonstrated how to fit them & bleed the brakes I had a go at it on my sv1000 and it's quite straight forward... If you're unsure of what you're doing, stick a post out in your local regional section and I'm sure someone will give you a hand - it's not that difficult, just if you've not done it before then it can be quite daunting, especially considering the brakes are probably the most important bit of your bike __________________ RIP Reeder 20/07/1988 - 21/03/2012 - You were awesome Cbf600, sv650, sv1000, gsxr 750 srad, KTM adventure 950, gsxr 750 k1, gsxr 750 srad, fazer 1000, zx9r ninja..

15-09-10, 12:28 PM	#6
AirArmed Guest Posts: n/a	Re: HEL braided lines to fit sv650 (pointy) hi i have now no need for them as changed bars and are not long enough, back for sale by me, i did not fit them to the bike. Last edited by AirArmed; 20-09-10 at 09:57 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
sv650, dl650 braided oil cooler lines.	vilguy	For Sale - SV's and SV related items	13	05-01-14 08:14 PM
hel braided lines for k5 pointy, k5 shock absorber (free) and 2 x snow plows (free)	Paul the 6th	For Sale - SV's and SV related items	9	30-06-09 02:47 PM
braided lines from k5 sv650 - will they fit a k5 svThou?	Paul the 6th	Bikes - Talk & Issues	6	05-04-09 10:24 PM
Stainless Braided Brake Lines (Pointy)	svdemon	Stuff Wanted	2	15-07-08 09:13 PM
Which braided brake lines for SV650?	zunkus	SV Talk, Tuning & Tweaking	19	28-03-08 12:20 PM