Bar Risers for 57 plate 650s wanted - SV650.org

24-10-10, 03:35 PM

I'm looking for a set of bar risers for my 57 plate 650s. Anybody selling any or any advice as to the best place to get some?

Any help would be greatly appreciated. Cheers. Tony.

hindle8907 · 15-11-10, 11:55 PM

what you looking for mate just the risers or a riser kit inc yoke n stuff?

16-11-10, 08:14 AM

You basically have a few alternatives:

HEL Bar Risers V. Expensive

I tried these, but weren't good enough for me

I eventually got one of the kits from here that sorted me aches and pains out:

http://www.streetfighterstore.co.uk/

Bibio · 16-11-10, 02:13 PM

gilles vario bars http://www.motorcycle-road-and-race....20_655_660.php

expensive but very very good, can adjust to you not the other way round. max rise 100mm. i found the 60mm rise gave enough to sit me up a bit more with a better angle and still use the original cables/wiring.

16-11-10, 04:37 PM

100mm still wasn't enough for me. Hence I did the conversion

Bibio · 16-11-10, 04:54 PM

yes but the ones you used were fixed. you can 'set' the vario bars in all directions up, down, back front and twist. but yes you will get a higher/wider rise out of a yoke conversion.

16-11-10, 07:06 PM

Quote:

Originally Posted by Bibio

yes but the ones you used were fixed. you can 'set' the vario bars in all directions up, down, back front and twist. but yes you will get a higher/wider rise out of a yoke conversion.

Correct. Banditmania ones were all wrong for me. I wasn't going to risk £300 down the pan so went for the full conversion.

16-11-10, 07:54 PM

Not sure mate, just looking for a bit of back relief. Do you have any for sale?

16-11-10, 10:53 PM

Quote:

Originally Posted by danf1234

100mm still wasn't enough for me.

Some folks are just never satisfied

maviczap · 17-11-10, 09:33 AM

This popped up in my daily EBAY search notification

http://cgi.ebay.co.uk/ws/eBayISAPI.d...=STRK:MEWAX:IT

24-10-10, 03:35 PM	#1
tonyburrell Guest Posts: n/a	Bar Risers for 57 plate 650s wanted I'm looking for a set of bar risers for my 57 plate 650s. Anybody selling any or any advice as to the best place to get some? Any help would be greatly appreciated. Cheers. Tony.

15-11-10, 11:55 PM	#2
hindle8907 Member Mega Poster Join Date: May 2009 Location: Manchester Posts: 1,492	Re: Bar Risers for 57 plate 650s wanted what you looking for mate just the risers or a riser kit inc yoke n stuff? __________________ 2006-2007 -- Gilera Runner 50 - Sold 2007-2008 -- Hyosung XRX125 - Stolen 2009-2010 -- 05 SV650n - CAT - B 2010-Now -- 00 SV650s & 00 SV650n & GSXR 600 K2 Last edited by hindle8907; 16-11-10 at 08:26 AM.

16-11-10, 08:14 AM	#3
danf1234 Guest Posts: n/a	Re: Bar Risers for 57 plate 650s wanted You basically have a few alternatives: HEL Bar Risers V. Expensive I tried these, but weren't good enough for me I eventually got one of the kits from here that sorted me aches and pains out: http://www.streetfighterstore.co.uk/

16-11-10, 02:13 PM	#4
Bibio Member Mega Poster Join Date: Jul 2008 Location: here as devil's advocate Posts: 11,552	Re: Bar Risers for 57 plate 650s wanted gilles vario bars http://www.motorcycle-road-and-race....20_655_660.php expensive but very very good, can adjust to you not the other way round. max rise 100mm. i found the 60mm rise gave enough to sit me up a bit more with a better angle and still use the original cables/wiring.

16-11-10, 04:37 PM	#5
danf1234 Guest Posts: n/a	Re: Bar Risers for 57 plate 650s wanted 100mm still wasn't enough for me. Hence I did the conversion

16-11-10, 04:54 PM	#6
Bibio Member Mega Poster Join Date: Jul 2008 Location: here as devil's advocate Posts: 11,552	Re: Bar Risers for 57 plate 650s wanted yes but the ones you used were fixed. you can 'set' the vario bars in all directions up, down, back front and twist. but yes you will get a higher/wider rise out of a yoke conversion.

16-11-10, 07:54 PM	#8
tonyburrell Guest Posts: n/a	Re: Bar Risers for 57 plate 650s wanted Not sure mate, just looking for a bit of back relief. Do you have any for sale?

17-11-10, 09:33 AM	#10
maviczap Member Mega Poster Join Date: Mar 2007 Posts: 9,097	Re: Bar Risers for 57 plate 650s wanted This popped up in my daily EBAY search notification http://cgi.ebay.co.uk/ws/eBayISAPI.d...=STRK:MEWAX:IT __________________ We're riding out tonight to case the promised land Make everyday count RIP Reeder - Jolly Green Giant and comedy genius

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Wanted : curvy handle bar risers	Nicky S	Stuff Wanted	0	24-09-09 11:38 AM
2001 Curvey Clip on bar risers.......Wanted	jumjum_0214	Stuff Wanted	5	12-05-09 10:50 PM
Bar Risers Wanted	Foey	Stuff Wanted	4	13-02-08 10:12 AM
Wanted k5 right mirror 650s	CS111	Stuff Wanted	0	03-06-07 11:05 AM
SV 650s 52 plate 12,000 and ONLY £1150	Dangle_kt	For Sale - SV's and SV related items	11	13-10-06 11:16 AM