Breaking Carby SV700 thunderbike

Carby SV700 parts inc:-

Carb engine with injected clutch cover, 700 kit, sigma slipper clutch (I will be taking generator, rocker covers and gear pos switch off) Offers?

41mm FCR Flatslides with filters, adapters and cables £500

Brembo 19x20 mastercyl (tatty but useable) £100

SES 50mm billet clipons £40

Triumph 675 fairing and seat, with alloy fairing bracket and steel subframe to suit (has some crash damage but repairable) £100

Sprint steering damper with clamp to suit gsxr forks (53mm fork clamp) straight but needs service £40

07966-280851 after 6pm

clutch, carbs, master cyl, front end now sold

Right after being messed around for ages I still have for sale:-

Brembo master cylinder, graze on lever and body but still perfectly useable £100

Sigma slipper clutch, wear on hub and pressure plate but still useable £300

50mm clip-ons billet clamps (different style L+R) tubes straight £40

Carby engine with 700 kit (need to check cams prob injected ones) missing rocker covers, generator and neutral switch £300

sprint steering damper 100mm stroke and 53mm clamp needs service £40

triumph 675 fairing and seat with brackets (alloy clock brkt) and modified steel subframe, damage to lhs but only cracks £100

mail:- r wittey at yahoo . co . uk

bump!

What cams are on that engine? Im looking to uprate my curvys cams. Also what is this 700 kit you speak of? Is it just a different piston or is there more to it? Also do u have any Dyno results from the engine?

Not sure on the cams, think theyre injected onnes, need to check numbers, I think the 700 kit is JE pistons, but dont belive the hype ive ran wiseco's with no problems in the past and I believe my 700 motor from 2006 is still going strong.
I did run the bike, but it had a coil problem so missfired over 7k, still made over 80hp though

Remaining bits now on ebay:-
http://www.ebay.co.uk/sch/071275rob/...id=p4340.l2562