fuse box testing:what does this mean?

Hi guys, I just tested my fuse box and I found really low current going through it IMG_5852-1.jpg. Any thought as to what this means? what's my next step?
here is a wiring diagram: http://www.svrider.com/forum/showthread.php?t=120691 staring at it but not sure what to think.

Any help appreciated! thanks!

just to make sure this is readable:

OK means no current at all (on all A settings), ignition and high light were OK
Low light: 0.2 with my votlmeter on 200uA
Signal: 0.2 (200uA)
meter: 0.5 on 200mA (so more here)

[admin]

Why are you testing? Do you have a problem?

Originally Posted by admin

Why are you testing? Do you have a problem?

hey John, thanks for responding. My bike is turning over but it's not sparking, so trying all the tests i can find in service manual and on forums.

I think the fuse box letting a bit of Amps out is probably not a short circuit after a bit of investigating; I just didnt know what that meant, but I think the results are ok (if anyone knows this to be untrue please correct me!)

I did so many tests, i started a new thread here today http://forums.sv650.org/showthread.p...33#post3053933