R & G crash mushrooms - SV650.org

20-08-04, 02:18 PM

Ordered direct from R & G. Fit well and look cool. You`ll need two 19mm sockets to fit them tho cos the bolt heads are about 40mm into the mushrooms.

Hope I never have to describe if they work! But they are of a sturdy construction and look OE.

20-08-04, 02:25 PM

Could you give us some details of the tail tidy, I dont think weve seen that one before.

21-08-04, 04:29 PM

It`s from Chris Vines in Louth. Sells them on ebay. Took two hours to fit but uses OE indicators, numberplate light and mounts.

Quite good but one of the holes was slightly out. £45 well spent.

24-08-04, 07:00 AM

Tested my R&G frame protectors this morning on the ride to work.

Bike dropped at about 30 - 40 mph (front locked up for reasons unknown).

Damage to bike:

Bent rear brake lever
Scratched up mirror
Scrathed top fairing
Scrathed Exhaust.
Scrathed bar end.

Apart from the rear brake lever, all the parts effected were scratched up anyway (from a crash a couple of months ago). But atleast nothing else was damaged.

Shame you can't order just one bung. Need to order a pair to replace the one thats worn down.

26-08-04, 04:19 PM

Cant`t you just get one then?

I`ve got individual bits from R&G before, ask nicely!

20-08-04, 02:18 PM	#1
CarlSV650 Guest Posts: n/a	R & G crash mushrooms Ordered direct from R & G. Fit well and look cool. You`ll need two 19mm sockets to fit them tho cos the bolt heads are about 40mm into the mushrooms. Hope I never have to describe if they work! But they are of a sturdy construction and look OE.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Crash Mushrooms	mouldy	Stuff Wanted	4	16-04-09 08:50 PM
Crash Mushrooms	ferret	SV Talk, Tuning & Tweaking	68	16-03-08 07:19 PM
set of r&g crash mushrooms	d8mof	Stuff Wanted	9	19-07-07 11:49 PM
Ebay Crash Mushrooms	scWirral	SV Talk, Tuning & Tweaking	18	05-04-06 09:03 AM
DHM CRASH MUSHROOMS	karen	For Sale - SV's and SV related items	0	15-03-06 04:54 PM

20-08-04, 02:25 PM	#2
Anonymous Guest Posts: n/a	Could you give us some details of the tail tidy, I dont think weve seen that one before.

21-08-04, 04:29 PM	#3
CarlSV650 Guest Posts: n/a	It`s from Chris Vines in Louth. Sells them on ebay. Took two hours to fit but uses OE indicators, numberplate light and mounts. Quite good but one of the holes was slightly out. £45 well spent.

24-08-04, 07:00 AM	#4
Muttley Guest Posts: n/a	Tested my R&G frame protectors this morning on the ride to work. Bike dropped at about 30 - 40 mph (front locked up for reasons unknown). Damage to bike: Bent rear brake lever Scratched up mirror Scrathed top fairing Scrathed Exhaust. Scrathed bar end. Apart from the rear brake lever, all the parts effected were scratched up anyway (from a crash a couple of months ago). But atleast nothing else was damaged. Shame you can't order just one bung. Need to order a pair to replace the one thats worn down.

26-08-04, 04:19 PM	#5
CarlSV650 Guest Posts: n/a	Cant`t you just get one then? I`ve got individual bits from R&G before, ask nicely!