 |
 |
| Bikes - Talk & Issues Newsworthy and topical general biking and bike related issues. No crapola! Need Help: Try Searching before posting |
 |
|
|
Thread Tools |
13-01-05, 08:30 PM
|
#1 |
|
Guest
Posts: n/a
|
Aaargh! help help! :(
I just replaced my clutch lever and gear lever... now when the engine is running i cant select any gear
 i can usually get first but the lever is rock hard and cant select any other gear. When i turn the engine off i can select the gears with ease...Can anyone help? (gotta get into work tomorrow night :/ ) also i think its the clutch line that goes in just over where the push rod goes? theres 2 nuts there that just spin freely :/ Many thanks in advance Yours beggingly Iain |
|
|
13-01-05, 08:59 PM
|
#2 |
|
Member
Join Date: Jul 2004
Location: West London
Posts: 188
|
have you checked out the diags in the manuals published on this site? Sounds like you need to double check everything. The push rod has a very specific adjustment screwed in till resistance is felt, then backed off a 1/4 turn (or is it 1/2). Sorry that's not so specific! check out the manuals.
Al
__________________
SFV650 in black with Evotech tailtidy, R&G Aeros and Heated Grips, Puig fly screen, Pipe Werx GP style race exhaust. Whoop! Previously.... Black SVS - DHM's Heated Grips Airblade Iridium Double Bubble Screen Beowulf end can and Evotech tailtidy. 3/7/2004 - 26/6/2015. |
|
|
|
13-01-05, 09:07 PM
|
#3 |
|
Guest
Posts: n/a
|
You've not adjusted the clutch cable where it goes in behind the sprocket cover then?
That'll be your problem. If you're still struggling tomorrow I might be able to help, that is if you're not going to work before 6. |
|
|
|
13-01-05, 09:17 PM
|
#4 |
|
Guest
Posts: n/a
|
Clutch cable it be.
Buy a Haynes, easy to follow problem solving for about £15-...... At your local Halfords .... Tell 'em those cheques haven't come my way for a while now... |
|
|
|
13-01-05, 10:26 PM
|
#5 |
|
Guest
Posts: n/a
|
been fiddling with it for about 4 hours now, still knackered.
changed the free play from slack to tight, no real change, also when i put it in 1st gear, theres a slight pull by the bike... im an engineering noob so not sure whats going on Iain |
|
|
|
13-01-05, 11:32 PM
|
#6 |
|
Guest
Posts: n/a
|
well kept on fiddling and seems to be alot smoother now, i think its a bit 'clunkyier' now on the shifting, but ill try with 1/4 turns n stuff tomorrow, got a cracking headache now, prolly the fumes
 Iain |
|
|
|
14-01-05, 07:34 AM
|
#7 |
|
Member
Mega Poster
Join Date: Jul 2003
Location: South London
Posts: 9,799
|
Iain, I'm finished about lunchtime, so if this is still an issue I could call in on my way through south London (don't know where you are) if that's any help?
Will check this thread again before setting of home at about 12. Cheers Mark.
__________________
Life should not be a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside, in a cloud of smoke, thoroughly used up, totally worn out, and loudly proclaiming, 'Wow! What a Ride! |
|
|
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Aaargh! | yorkie_chris | Idle Banter | 13 | 24-12-07 11:37 AM |
