 |
 |
| SV Talk, Tuning & Tweaking Discussion and chat on all topics and technical stuff related to the SV650 and SV1000 Need Help: Try Searching before posting |
 |
|
|
Thread Tools |
20-02-06, 06:42 PM
|
#1 |
|
Guest
Posts: n/a
|
curvy carb restrictors..??
im not after derestricting the bike im just curious as to were the restrictors are
today i was doing general cleaning and maintenance on the bike putting grease on wires and cables and i had to remove the air box wich just popped off, wich i wasnt expecting and i could see right into the air box sides of the carbs and there was no visible washers or anything so just wondering where they are.? thanks dene |
|
|
20-02-06, 07:17 PM
|
#2 |
|
The Sick Man
Mega Poster
Join Date: Nov 2004
Location: Peckham.SE.LDN
Posts: 4,768
|
You prob have the Suzuki restrictors, which are replacement sliders (the black bit inside the carbs that moves). The diffrence is further up the slider, would only be able to see it if you took them out.
This is what they look like (top restricted, bottom original):  WARNING - This is only for people that hold an unrestricted licence, if not you will be braking the law. This is how its done. http://forums.sv650.org/viewtopic.php?t=26902
__________________
OTR: KTM 690 Duke R 2015 Full Akro SIDELINE: Kwak ZX636 A1P 2002, Red, R&G's, Yoshi, Double Bubble Screen GONE: Kwak ZX-7R P1, Full Akro, Undertray, Screen GONE: SV650S K2 Very Bruised & Without Fairing, Motovation Frame Sliders, R&G Ally Sprocket Toe Protector, HEL 2 Line Setup, GSXR K1 600 RWU Forks, Barnett Clutch & Springs, Penske 8981 Shock, Gilles Ti Rearsets, Steel Barends, Scottoiler, AFAM Chain & Sprockets, Twin FIAMM Horns, Skidmarx Bellypan, Full Micron Zeta Steel System, Cut down undertay. Forum Problems & Information / Site Suggestions |
|
|
|
20-02-06, 07:19 PM
|
#3 |
|
Guest
Posts: n/a
|
the shop told me carb washers, maybe they lied..
so sliders u gotta buy new ones?? |
|
|
|
20-02-06, 07:20 PM
|
#4 |
|
Guest
Posts: n/a
|
yep what he sed.
|
|
|
|
20-02-06, 07:21 PM
|
#5 |
|
The Sick Man
Mega Poster
Join Date: Nov 2004
Location: Peckham.SE.LDN
Posts: 4,768
|
There are two ways to restrict, sliders or washers. But washers you should see them from the top i think, never seen a pic of them installed on an SV.
__________________
OTR: KTM 690 Duke R 2015 Full Akro SIDELINE: Kwak ZX636 A1P 2002, Red, R&G's, Yoshi, Double Bubble Screen GONE: Kwak ZX-7R P1, Full Akro, Undertray, Screen GONE: SV650S K2 Very Bruised & Without Fairing, Motovation Frame Sliders, R&G Ally Sprocket Toe Protector, HEL 2 Line Setup, GSXR K1 600 RWU Forks, Barnett Clutch & Springs, Penske 8981 Shock, Gilles Ti Rearsets, Steel Barends, Scottoiler, AFAM Chain & Sprockets, Twin FIAMM Horns, Skidmarx Bellypan, Full Micron Zeta Steel System, Cut down undertay. Forum Problems & Information / Site Suggestions |
|
|
|
|
20-02-06, 09:38 PM
|
#6 |
|
Guest
Posts: n/a
|
so slides how do u do that 1?
do u need to buy new slides?? |
|
|
|
20-02-06, 10:13 PM
|
#7 | |
|
The Sick Man
Mega Poster
Join Date: Nov 2004
Location: Peckham.SE.LDN
Posts: 4,768
|
Quote:
__________________
OTR: KTM 690 Duke R 2015 Full Akro SIDELINE: Kwak ZX636 A1P 2002, Red, R&G's, Yoshi, Double Bubble Screen GONE: Kwak ZX-7R P1, Full Akro, Undertray, Screen GONE: SV650S K2 Very Bruised & Without Fairing, Motovation Frame Sliders, R&G Ally Sprocket Toe Protector, HEL 2 Line Setup, GSXR K1 600 RWU Forks, Barnett Clutch & Springs, Penske 8981 Shock, Gilles Ti Rearsets, Steel Barends, Scottoiler, AFAM Chain & Sprockets, Twin FIAMM Horns, Skidmarx Bellypan, Full Micron Zeta Steel System, Cut down undertay. Forum Problems & Information / Site Suggestions |
|
|
|
|
|
20-02-06, 10:58 PM
|
#8 |
|
Guest
Posts: n/a
|
wha £50
shouldnt the shop give them me as the bike wasnt restricted untill i bought it... |
|
|
|
20-02-06, 10:59 PM
|
#9 | |
|
The Sick Man
Mega Poster
Join Date: Nov 2004
Location: Peckham.SE.LDN
Posts: 4,768
|
Quote:
__________________
OTR: KTM 690 Duke R 2015 Full Akro SIDELINE: Kwak ZX636 A1P 2002, Red, R&G's, Yoshi, Double Bubble Screen GONE: Kwak ZX-7R P1, Full Akro, Undertray, Screen GONE: SV650S K2 Very Bruised & Without Fairing, Motovation Frame Sliders, R&G Ally Sprocket Toe Protector, HEL 2 Line Setup, GSXR K1 600 RWU Forks, Barnett Clutch & Springs, Penske 8981 Shock, Gilles Ti Rearsets, Steel Barends, Scottoiler, AFAM Chain & Sprockets, Twin FIAMM Horns, Skidmarx Bellypan, Full Micron Zeta Steel System, Cut down undertay. Forum Problems & Information / Site Suggestions |
|
|
|
|
|
20-02-06, 11:00 PM
|
#10 |
|
Guest
Posts: n/a
|
i didnt,
so im guessing its washers and they are on the engine side of the carbs.. |
|
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Curvy 33BHP Restrictors required (any method) | RatchetJob | Stuff Wanted | 5 | 14-05-09 10:43 AM |
| Restrictors (FI international) for Curvy. | ricky_t | For Sale - SV's and SV related items | 5 | 14-09-08 02:20 PM |
| curvy restrictors (FI type) | farquare | For Sale - SV's and SV related items | 1 | 24-05-08 11:56 PM |
| 33bhp restrictors for curvy | Jimbo_Bimbo | For Sale - SV's and SV related items | 4 | 29-10-07 04:34 AM |
| Curvy 33bhp restrictors, Suzuki Genuine Parts ***SOLD*** | Saint Matt | For Sale - SV's and SV related items | 8 | 25-10-06 01:20 PM |
