SV650.org - SV650 & Gladius 650 Forum

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)
-   Idle Banter (http://forums.sv650.org/forumdisplay.php?f=116)
-   -   Poll: What would you spend £60 quid on? (http://forums.sv650.org/showthread.php?t=162061)

barwel1992 31-01-11 11:57 AM

Re: Poll: What would you spend £60 quid on?
 
Quote:

Originally Posted by -Ralph- (Post 2472314)
I thought Abba stands were a lot more expensive than that so I had never really looked or considered one. Just looked at the Abba stand website at a video and seen one in use. You could drop engines, remove swingarms, get either wheel off the floor & do forks. I could easily make my own fitting so it fits the XT600 as well.

It's a no brainer, I'm getting an Abba stand.

Thanks Barwel.

Informed opinions my ar$e. Why did nobody else suggest that? Think out of the box people ;-) :lol:

haha lol :mrgreen:

kaivalagi 01-02-11 07:44 AM

Re: Poll: What would you spend £60 quid on?
 
Quote:

Originally Posted by -Ralph- (Post 2472314)
It's a no brainer, I'm getting an Abba stand.
...
Informed opinions my ar$e. Why did nobody else suggest that? Think out of the box people ;-) :lol:

Good man, you wont regret it...

Oh and I did suggest it in the first page:
Quote:

Originally Posted by kaivalagi (Post 2469997)
paddock stand, or better still a second hand Abbas stand if you can find one

But I'm a less than 20 minutes and 3 miles kinda guy who thinks scott oilers aren't necessary on every bike...maybe if I end up doing lots of miles I'll get one when I buy my next C&S in 2 years time...

If you're going to buy an Abba new ring the order in and mention the forum cause you'll get 10% off! That's what I did :thumbsup:

G 01-02-11 08:08 AM

Re: Poll: What would you spend £60 quid on?
 
The abba stand has a very dodgy way of connecting to my bike (SSSA), and the only other real option that wasnt so cheap I didnt trust it was the DP one.

Abba stands are defo cool for the right bike.

kaivalagi 01-02-11 08:13 AM

Re: Poll: What would you spend £60 quid on?
 
Quote:

Originally Posted by G (Post 2472895)
The abba stand has a very dodgy way of connecting to my bike (SSSA)

Really? So the swinging arm pivot is not there on both sides of the bike? I would have thought that single sided or not the pivot would be available to use as with DSSA...? Curious, especially as I was thinking of a triple for the next bike and would think I could get the new abba adapters for it (long long term)

edit: I am guessing that the pivot nut/bolts are not "connectable" for some reason?

orose 01-02-11 08:16 AM

Re: Poll: What would you spend £60 quid on?
 
G: not sure what you mean there... I've had my SSSA triumph up on the abba, and it was no different to the GSXR before it. What's odd about the motard?

G 01-02-11 08:22 AM

Re: Poll: What would you spend £60 quid on?
 
Quote:

Originally Posted by kaivalagi (Post 2472897)
Really? So the swinging arm pivot is not there on both sides of the bike? I would have thought that single sided or not the pivot would be available to use as with DSSA...? Curious, especially as I was thinking of a triple for the next bike and would think I could get the new abba adapters for it (long long term)

edit: I am guessing that the pivot nut/bolts are not "connectable" for some reason?


I don't know what the fitting is on the triple but on my bike the abba stand fits to a solid hex nut... a solid hex nut which only has a depth of about 6mm for the stand connector to connect to. Which to me does not appear sufficient or safe and the bike could easily fall off. Defo worth checking the fittment before ordering.

Image sent by abba....

http://sphotos.ak.fbcdn.net/hphotos-..._4000904_n.jpg

kaivalagi 01-02-11 09:09 AM

Re: Poll: What would you spend £60 quid on?
 
Wow, 6mm isn't much at all...especially if you have to have the stand further apart too...I see why you'd be a little concerned

xXBADGERXx 01-02-11 06:44 PM

Re: Poll: What would you spend £60 quid on?
 
Just one word of warning here ....... Abba wrap their stands up very well , in about 130 yards of shrink wrap , sharp knife and extract stand in an orderly fashion , don`t go at it like Jack the Ripper otherwise you will scratch the paint on the stand

yorkie_chris 01-02-11 06:46 PM

Re: Poll: What would you spend £60 quid on?
 
It will take you longer to get into the stand than it will to do whatever job you needed the stand for!

xXBADGERXx 01-02-11 06:50 PM

Re: Poll: What would you spend £60 quid on?
 
Aye , I`ve changed Chain and Sprockets quicker than getting an Abba stand out of the packaging


All times are GMT. The time now is 07:00 AM.

Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.