SV650.org - SV650 & Gladius 650 Forum

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)
-   Bikes - Talk & Issues (http://forums.sv650.org/forumdisplay.php?f=129)
-   -   What have you tinkered with today? (http://forums.sv650.org/showthread.php?t=212692)

Bibio 09-06-18 07:39 PM

Re: What have you tinkered with today?
 
bad move on the Ti pins unless you put coper grease on them and the holes. where exactly did you put the RRG?

proze 09-06-18 09:22 PM

Re: What have you tinkered with today?
 
I did. :) The rrg is on the seals.

proze 10-06-18 08:53 PM

Re: What have you tinkered with today?
 
Today I treated some rust inside the chrome headlight surround with Kurust. I also took the tank off and inspected it. Still waiting on the paint for the triple...

ophic 11-06-18 10:28 AM

Re: What have you tinkered with today?
 
Quote:

Originally Posted by Bibio (Post 3086905)
bad move on the Ti pins unless you put coper grease on them and the holes. where exactly did you put the RRG?

I invested in some when I first serviced my SV brakes probably 12 or so years ago. They were still in fine condition last brake pad change before crash last year. They don't seem to corrode.

And I definitely err well on the safe side of "maintenance induced failure" if you know what I mean :D

DarrenSV650S 14-06-18 07:37 PM

Re: What have you tinkered with today?
 
Took the wheels off ready for some new rubber tomorrow.

https://farm2.staticflickr.com/1748/...596a1138_b.jpg

So do you think if I throw my wheel in to the sun this sticky stuff will come off? Because HO LEE SH*T it will not come off!

https://farm1.staticflickr.com/892/2...f7a1a539_b.jpg

I give up

admin 14-06-18 07:45 PM

Re: What have you tinkered with today?
 
Quote:

Originally Posted by DarrenSV650S (Post 3087196)
Took the wheels off ready for some new rubber tomorrow.

https://farm2.staticflickr.com/1748/...596a1138_b.jpg

So do you think if I throw my wheel in to the sun this sticky stuff will come off? Because HO LEE SH*T it will not come off!

https://farm1.staticflickr.com/892/2...f7a1a539_b.jpg

I give up

Nice. I always fancied an Aprilia Shiva myself. Try a solvent like white spirit on the wheels. It's good at dissolving glue and grease.

Sent from my Nexus 7 using Tapatalk

Bibio 14-06-18 09:00 PM

Re: What have you tinkered with today?
 
fixing the holes in my rukka gear. it should be waterproof although it dont look pretty.. lol

it'll do till i can raid the penny jar again.

Red ones 14-06-18 09:46 PM

Re: What have you tinkered with today?
 
Quote:

Originally Posted by DarrenSV650S (Post 3087196)



Is that an Aprilia engine block, or a rebadged Rotax?


Sent from my iPhone using Tapatalk

DarrenSV650S 15-06-18 06:44 AM

Re: What have you tinkered with today?
 
Quote:

Originally Posted by admin (Post 3087199)
Nice. I always fancied an Aprilia Shiva myself. Try a solvent like white spirit on the wheels. It's good at dissolving glue and grease.

Sent from my Nexus 7 using Tapatalk

Shiver would be the more sensible option for sure! Won't spirit remove more of the paint?

Quote:

Originally Posted by Red ones (Post 3087213)
Is that an Aprilia engine block, or a rebadged Rotax?


Sent from my iPhone using Tapatalk

It's an Aprilia engine

admin 15-06-18 06:51 AM

Re: What have you tinkered with today?
 
Quote:

Originally Posted by DarrenSV650S (Post 3087222)
Shiver would be the more sensible option for sure! Won't spirit remove more of the paint?



It's an Aprilia engine

White spirit is fine on cured paint. Don't use it on fresh though. I've been cleaning my bikes for years with the stuff. Mainly to remove chain fling off the rear wheel and the rear of the bike. Just about any solvent will remove glue such as meths.

Sent from my Nexus 7 using Tapatalk


All times are GMT. The time now is 11:17 PM.

Powered by vBulletin® - Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.