SV650.org - SV650 & Gladius 650 Forum
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)
-   Stuff Wanted (http://forums.sv650.org/forumdisplay.php?f=114)
-   -   Front Caliper Bracket Needed!! (http://forums.sv650.org/showthread.php?t=124148)

yorkie_chris 20-01-09 04:23 PM
Re: Front Caliper Bracket Needed!!
 
Big hammer? File the lug down a bit (as I bet it's the lug which is catching)

If it is actually bent, which I doubt, are the forks aligned on the wheel correctly? I reckon there's some other problem, unless this hole was about 2 foot deep.

yardar83 20-01-09 05:32 PM
Re: Front Caliper Bracket Needed!!
 
Quote:
Originally Posted by svdemon (Post 1752622)
I have a pair of calipers available with newish HH pads, make me an offer if you're interested.

as i said earlier, i dont really no anything about bikes so if you want to sell them then let me know how much you want for them. i dont know how much to offer you. i dont know what HH pads are aswell!

yardar83 20-01-09 05:35 PM
Re: Front Caliper Bracket Needed!!
 
Quote:
Originally Posted by yorkie_chris (Post 1752629)
Big hammer? File the lug down a bit (as I bet it's the lug which is catching)

If it is actually bent, which I doubt, are the forks aligned on the wheel correctly? I reckon there's some other problem, unless this hole was about 2 foot deep.

well it makes sense about the hole cos as soon as i hit that hole i felt and heard a scrapping sound on the front wheel and brakes. I took it to a proper suzuki garage to get some electronics fixed and they noticed it, said it was just the braket that is bent and needs replacing.

yorkie_chris 20-01-09 05:38 PM
Re: Front Caliper Bracket Needed!!
 
I think it's something else.

Any evidence of damage to the caliper itself? Because to bend a steel bracket is going to show some serious knockage to the alloy body of it! More likely (sorry!) is that the fork leg is a little twisted.

How big was this hole you rode into anyway?

yardar83 20-01-09 06:07 PM
Re: Front Caliper Bracket Needed!!
 
Quote:
Originally Posted by yorkie_chris (Post 1752778)
I think it's something else.

Any evidence of damage to the caliper itself? Because to bend a steel bracket is going to show some serious knockage to the alloy body of it! More likely (sorry!) is that the fork leg is a little twisted.

How big was this hole you rode into anyway?
well the mechanics in the shop said that the forks were fine and that the rest of the caliper was fine it was just the bracket that i needed to replace....


All times are GMT. The time now is 06:40 PM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.