SV650.org - SV650 & Gladius 650 Forum

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)
-   Bikes - Talk & Issues (http://forums.sv650.org/forumdisplay.php?f=129)
-   -   Puncture repair kits (http://forums.sv650.org/showthread.php?t=124634)

Baph 29-01-09 02:09 AM

Re: Puncture repair kits
 
Quote:

Originally Posted by teriyakimonkey (Post 1764325)
Would that be the stuff that inflates the tyre and bungs the gap in one handy squirty can? Is it that bad cos I have a can?

I had one puncture, and put a can of that stuff in. Fine, no problem. But I got the tyre changed ASAP.

I had another puncture later, used one can. Nope. Another can. Still no. Another can, for frig's sake no!! So I rode a carefully planned route to the tyre fitter stopping at everywhere I could to re-inflate the tyre.

I'd never buy one again.

monkey 29-01-09 02:29 AM

Re: Puncture repair kits
 
Thanks fellas.

Following my derail here's a good link for you.

Think I may have to get one! (I'll have to test their 'fits under any seat' claim)

Saying that, how do you get the bung inside the tyre in the first place? Surely you don't have to brake the bead?

Baph 29-01-09 02:33 AM

Re: Puncture repair kits
 
Quote:

Originally Posted by teriyakimonkey (Post 1764375)
Thanks fellas.

Following my derail here's a good link for you.

Think I may have to get one! (I'll have to test their 'fits under any seat' claim)

That's pretty much the kit I have, with only some minor aesthetic changes.

MattCollins 29-01-09 04:24 AM

Re: Puncture repair kits
 
Check out the Rema Tip Top site. http://www.rema-tiptop.com.au Look for minicombis.

Cheers

Dave20046 29-01-09 07:59 AM

Re: Puncture repair kits
 
1 vote for ultraseal

Sosha 29-01-09 03:39 PM

Re: Puncture repair kits
 
Quote:

Originally Posted by SoulKiss (Post 1763920)
Instead of plugs and glue - get sticky string :)

You can find it on ebay

I can't......

Anyone passing Chas Bikes?

Sosha 29-01-09 03:41 PM

Re: Puncture repair kits
 
Quote:

Originally Posted by teriyakimonkey (Post 1764325)
Would that be the stuff that inflates the tyre and bungs the gap in one handy squirty can? Is it that bad cos I have a can?

Could be wrong but I don't believe you can get a tyre repaired after using it.

(And your tyre place'll hate you)

JamesMio 29-01-09 03:43 PM

Re: Puncture repair kits
 
Just ordered a tube of sticky string - any suggestions for which inflator to get from that link on the previous page?

Cheers
JM

MattCollins 29-01-09 03:49 PM

Re: Puncture repair kits
 
Quote:

Originally Posted by JamesMio (Post 1764970)
...any suggestions for which inflator to get from that link on the previous page?

Not on that page, but I'd suggest a MTB Pump.

Cheers

Sosha 29-01-09 03:53 PM

Re: Puncture repair kits
 
Quote:

Originally Posted by teriyakimonkey (Post 1764375)
Thanks fellas.

Following my derail here's a good link for you.

Think I may have to get one! (I'll have to test their 'fits under any seat' claim)

Saying that, how do you get the bung inside the tyre in the first place? Surely you don't have to brake the bead?

That's what I had. Worked (second time lucky) and that was with me attempting it.

Worked as well as the "wack some superglue on the threads and screw it back in" method that was my only other previous attempt at avoiding deflation.

Quote:

Originally Posted by teriyakimonkey (Post 1764375)
Saying that, how do you get the bung inside the tyre in the first place? Surely you don't have to brake the bead?

Plug slots in the metal thing. Which you push into the hole (with tyre deflated)
If you're me you swear a lot, wobble around trying to get metal pointy thing plus plug back into the hole, accidently stand on the glue tube, shed a tear and eventually manage to rip the ist plug in half. For the second attempt you go and get something with knee armour and make use of all the donuts you had for lunch by kneeling against the thing and getting your weight behind it.


All times are GMT. The time now is 02:53 AM.

Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.