SV650.org - SV650 & Gladius 650 Forum
Page 2 of 5 1 2 345
Show 40 post(s) from this thread on one page

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)
-   SV Talk, Tuning & Tweaking (http://forums.sv650.org/forumdisplay.php?f=111)
-   -   Tank Spacers? (http://forums.sv650.org/showthread.php?t=134044)

JPBiker645 18-06-09 07:11 PM
Re: Tank Spacers?
 
Quote:
Originally Posted by yorkie_chris (Post 1945289)
Errr, OK have fun.

There is no gain to be had from rejetting when you haven't changed the engines airflow. With a stock filter and a slip on pipe the stock jetting is OK.

You want every edge? You racing it?
wouldn't increasing the flow out the exhaust require me to re jet it .... wouldn't it lean it out?

no racing for me, just wanna make the bike at low rpms a little more snappy.

JPBiker645 18-06-09 07:14 PM
Re: Tank Spacers?
 
Quote:
Originally Posted by flymo (Post 1945299)
You would be better spending your money on good quality suspension. There is far more improvement to be had in the handling department than you will ever get from the engine on an SV.
can i trade out a whole front set up from a Kawasaki Ninja ZX-636 ?

is there anything else that would fit?

yorkie_chris 18-06-09 07:15 PM
Re: Tank Spacers?
 
What model?

JPBiker645 19-06-09 03:49 AM
Re: Tank Spacers?
 
Quote:
Originally Posted by yorkie_chris (Post 1946160)
What model?

year 2000 naked

Red Herring 19-06-09 06:46 AM
Re: Tank Spacers?
 
For the vain amongst us removing the snorkel and fitting tank risers does give a nice induction roar......

dyzio 19-06-09 09:09 AM
Re: Tank Spacers?
 
[derail]
I've got a set of Chewy's raisers somewhere, if anyone wants them, give me a shout.
[/derail]

Sally 19-06-09 09:12 AM
Re: Tank Spacers?
 
Quote:
Originally Posted by JPBiker645 (Post 1946586)
year 2000 naked
He meant which model is the kwak?

GavinD 19-06-09 09:14 AM
Re: Tank Spacers?
 
did you say exhaust of a quad . . . .

exhausts are very specific - try one designed for an SV

yorkie_chris 19-06-09 03:00 PM
Re: Tank Spacers?
 
Not really.
A slip on can type silencer is broadly the same thing. Obviously one meant for a CG125 might be a little restrictive. But, practically all of the cans on sale at the moment are 2" bore, roughly same length. Work exactly the same...

GavinD 19-06-09 03:06 PM
Re: Tank Spacers?
 
Quote:
Originally Posted by yorkie_chris (Post 1947268)
Not really.
A slip on can type silencer is broadly the same thing. Obviously one meant for a CG125 might be a little restrictive. But, practically all of the cans on sale at the moment are 2" bore, roughly same length. Work exactly the same...
. . . if you set it up on a dyno to match with carburation etc


All times are GMT. The time now is 10:06 AM.
Page 2 of 5 1 2 345
Show 40 post(s) from this thread on one page

Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.