SV650.org - SV650 & Gladius 650 Forum

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)
-   SV Talk, Tuning & Tweaking (http://forums.sv650.org/forumdisplay.php?f=111)
-   -   steam in the rain (http://forums.sv650.org/showthread.php?t=152892)

yorkie_chris 08-06-10 08:43 PM

Re: steam in the rain
 
Terrible design!
Fully enclose the bike, especially that troublesome radiator.

Evaporative heat transfer doesn't half cool it down, and the hotter it runs the faster it must be, right?

Sid Squid 08-06-10 08:50 PM

Re: steam in the rain
 
Quote:

Originally Posted by yorkie_chris (Post 2290889)
Terrible design!
Fully enclose the bike, especially that troublesome radiator.

Evaporative heat transfer doesn't half cool it down, and the hotter it runs the faster it must be, right?

Brilliant!

Err... Maybe not.

Owenski 08-06-10 09:49 PM

Re: steam in the rain
 
how is it good design?

IMO yeah it is bad design, if the mud guard did more than give the front wheel a fringe, for example if it were long enough to reduce the spray onto the front plug it might also be long enough to reduce the spray onto the front header pipe, and head for that matter. You reduce the spray you reduce the water contact on hot surface you reduce the steam. I can appreciate that your never going to irradicate the steam all together but with better design it could be reduced.
If Im over looking something please let me know Im more than willing to be educated :)

Lozzo 08-06-10 10:24 PM

Re: steam in the rain
 
Who can remember Kawasaki 2-stroke triples that used to seize the middle pot until the factory designed a new shorter front mudguard?

davepreston 08-06-10 10:50 PM

Re: steam in the rain
 
Quote:

Originally Posted by Lozzo (Post 2290991)
Who can remember Kawasaki 2-stroke triples that used to seize the middle pot until the factory designed a new shorter front mudguard?

sorry lozzo mate i wasnt born in 1807 but agree with your point :)







quickly finding a hidey hole

badsaboy 09-06-10 04:18 AM

Re: steam in the rain
 
ok ok. I first asked my m8 if he's GSXR had a similiar problem which he says he doesn't and thats why i posted in the first place. As for the question in bad design. You would think that only a minimul amount of water would be allowed to get onto hot engine components. My bike steams and steams even after ending my journey which would suggest a fair bit of water is either continually dripping onto something or laying somewhere boiling away. I only thought that this was a minor issue which could be minimised by fenda extenders or some cover ect.

yorkie_chris 09-06-10 07:41 AM

Re: steam in the rain
 
It's a good idea to fit a fender extender anyway, if it reduces steam then that is just incidental. Having 2 working cylinders is more important.


Quote:

Originally Posted by leedsmatt7 (Post 2290961)
IMO yeah it is bad design, if the mud guard did more than give the front wheel a fringe, for example if it were long enough to reduce the spray onto the front plug it might also be long enough to reduce the spray onto the front header pipe, and head for that matter. You reduce the spray you reduce the water contact on hot surface you reduce the steam. I can appreciate that your never going to irradicate the steam all together but with better design it could be reduced.
If Im over looking something please let me know Im more than willing to be educated :)

Agreed about the front plug issue, but at a standstill you still get a load of water dripping off the rest of the bike down onto the engine which steams off. And while moving you're not going to stop spray getting onto the radiator and rest of it.

Owenski 09-06-10 07:43 AM

Re: steam in the rain
 
Quote:

Originally Posted by Lozzo (Post 2290991)
Who can remember Kawasaki 2-stroke triples that used to seize the middle pot until the factory designed a new shorter front mudguard?

lol, Preston beat me too it with the old guy hit but no sorry lozzo i dont, and with out specifics I cant even google it to see which one your refering too.

Quote:

Originally Posted by yorkie_chris (Post 2291099)
Agreed about the front plug issue, but at a standstill you still get a load of water dripping off the rest of the bike down onto the engine which steams off. And while moving you're not going to stop spray getting onto the radiator and rest of it.

too true, thats what I'd consider as unavoidable though thats the same steam you'd get on any unfaired bike. Thinking about it I didnt even consider the naked version they must steam like a kettle!
The curvy chimneys all its steam up though between the upper fairings so you sit at the lights in the rain with a plume of steam rising up in front of your face (brilliant for steaming up the visor that little bit more). :rolleyes:

tigersaw 09-06-10 08:05 AM

Re: steam in the rain
 
Quote:

Originally Posted by Lozzo (Post 2290991)
Who can remember Kawasaki 2-stroke triples that used to seize the middle pot until the factory designed a new shorter front mudguard?

However the middle pot would cut out every time it rained.
Mine did that every downpour. It was ok to get home on, but the journey was always worried by the fact a second pot may go out as well, and with just one pot it was all it could do just to keep the engine turning over.

Matts-Yokes 09-06-10 12:27 PM

Re: steam in the rain
 
Quote:

Originally Posted by muddi (Post 2290736)
Not as daft a question as it sounds - in the rain my SV steams like a bloody train compared to my old er5, which hardly smoked at all - even when it was p*ssing it down!

bloomin SV will steam even if you spit on it (ok slight exaggeration - but you get the point ;) )

The only time an ER5 should smoke is when you do the decent thing and set fire to it.


All times are GMT. The time now is 07:00 AM.

Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.