Re: brake judder ?
 

they are about 1mm out on the straight edge (tried two edges just in case)

Re: brake judder ?
 

it's not good to have paint on that surface anyway, should be clean metal.

Re: brake judder ?
 

ok well i suppose that's a job for later today

Re: brake judder ?
 

disc's straightened, i thought right all will be good erm wrong still got judder when braking quite hard

i dont seem to have any pump in the leaver any more, would a slightly to lose stem nut create this ?

Re: brake judder ?
 

I got/get this sometimes, only when braking really hard and I only feel the judder at low speed after braking from highspeed.

Turned out my suspension what set up very very wrong and was bottoming out.

Still not sure if it there still as I don't dare brake to hard lol

Re: brake judder ?
 

not suspension as far a i know, i have a zip tie set to show how much travel i have left hard hard braking leaves about (about 1-2 inch) i might change some of the other settings and see if that makes a diff

its odd it get better the hotter the disc's are :S

Re: brake judder ?
 

What pads are they?

If they are racey pads for a heavier bike maybe they just need a good amount heat in them to work properly.

Re: brake judder ?
 

they are gold fren sintered HH pads same as what i had on the sv calipers, could just be that the pads are new is and the discs are new ish

Re: brake judder ?
 

Beware the judderman my dear, when the moon is fat

Re: brake judder ?
 

ohh dear lmao