SV650.org - SV650 & Gladius 650 Forum

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)
-   SV Talk, Tuning & Tweaking (http://forums.sv650.org/forumdisplay.php?f=111)
-   -   What diameter tubing do I need for bleeding brakes? (http://forums.sv650.org/showthread.php?t=159010)

davepreston 22-10-10 01:52 PM

Re: What diameter tubing do I need for bleeding brakes?
 
the pipeing from a oxygen mask works a treat, i aquired some on one of my hospital stays, the nipple at either end fits pefectly over the nipple and is long enough to run back up to the resivior so no wastage

hongman 22-10-10 02:04 PM

Re: What diameter tubing do I need for bleeding brakes?
 
lol.

What I'll do then is crash becuase my brakes arent up to scratch, and when in hospital I'll theif some of the tubing for when I get out :D

davepreston 22-10-10 02:08 PM

Re: What diameter tubing do I need for bleeding brakes?
 
just walk up and ask they have to dispose of every mask after they are used once and if its just the tubing and you tell them what you intend to use it for they more than likely will just give you it (they did me with a giggle) your local nurse in your docs office etc etc

benji106 22-10-10 02:16 PM

Re: What diameter tubing do I need for bleeding brakes?
 
Quote:

Originally Posted by yorkie_chris (Post 2402963)
No... only function of the tube is to keep brake fluid from spilling which will happen anyway.

I find a clear tube is quite useful because you can see the air bubbles escaping, and when they stop coming out.

yorkie_chris 22-10-10 03:13 PM

Re: What diameter tubing do I need for bleeding brakes?
 
You can see that by looking at what's coming out of the nipple as air will sputter.

However with the tubing method you will also suck air in around the threads.

hongman 22-10-10 03:17 PM

Re: What diameter tubing do I need for bleeding brakes?
 
Meh.

Just had a butchers at my pads and they all need changing soon-ish, wondering if I should just wait til they need doing and doing the overhaul then - just bleed for now.

TamSV 23-10-10 11:47 AM

Re: What diameter tubing do I need for bleeding brakes?
 
Quote:

Originally Posted by davepreston (Post 2403039)
(they did me with a giggle)

Nice. You must have BUPA.:)

hongman 23-10-10 02:49 PM

Re: What diameter tubing do I need for bleeding brakes?
 
Well, bought some cheapo one man bleed kit from Halfrauds, and job done. Wasn't as hard as I thought it would be, after reading so much about trapped bubbles etc. Bled mine through no probs, brakes feel a bit better than before (may be placebo though?)

Now my brake fluid is a yellow colour and not brown :D

barwel1992 23-10-10 09:07 PM

Re: What diameter tubing do I need for bleeding brakes?
 
if its brow, new fluid will be much better :D full stop

hongman 23-10-10 09:35 PM

Re: What diameter tubing do I need for bleeding brakes?
 
Well I havent been able to test it properly yet past walking pace as it started to hammer it down shortly after I finished, but tomorrow hopefully.


All times are GMT. The time now is 08:54 PM.

Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.