Re: Attempted theft - ignition barrel damaged
 

a new key is 4 quid mate and unless your an idiot you'd change all the locks hence it being a COMPLETE lockset ffs

Re: Attempted theft - ignition barrel damaged
 

Sorry, yep, what I meant was Berlin's might not be as much as the Ebay one.

Berlins has 2 keys as well :)

Re: Attempted theft - ignition barrel damaged
 

60 bangers delivered from carl was what he quoted bigchris

Re: Attempted theft - ignition barrel damaged
 

Blimey :confused: The other ones a bargain then

Re: Attempted theft - ignition barrel damaged
 

hehehe- hence why i pointed that seller out to him mate.the ignition barrel only is on the bay for 25 quid plus 9 delivery so its worth the 40 quid for everything(but i'd best offer 35)

h.

Re: Attempted theft - ignition barrel damaged
 

Typo. I was refering to the key which doesn't loOk genuine.
Sure would change all locks when buying a COMPLETE lock set.

Before I buy a new set I would bolt out the lock-cylinder and try to repair it.

http://www.svrider.de/Homepage/Bilde...011c61af41.JPG

Lock inner parts can't be more than bent and if the cylinder is damaged I can offer the pictured one for free.

Re: Attempted theft - ignition barrel damaged
 

As above id suggest trying to repair it first. The same thing happened to my sv. You need to undo 2 security torx on bottom side of yoke then barrel will come free, then undo 2 philips screws on top and remove cap and you can pull out the actual barrel insert thingy. It is actually more simple than it sounds or looks. I ended up rubbing down the brass inserts substantially hence now you could prob start my bike with a spoon. Sorry if youve already tried this just trying to help.

Matt

Re: Attempted theft - ignition barrel damaged
 

Thanks.

Do you, or anyone else know if I will need a drill with a torx bit attached to undo the security screws? Or would a screwdriver with a torx bit be sufficient?

Re: Attempted theft - ignition barrel damaged
 

You definately won't need a drill unless you want to drill something ;)

Re: Attempted theft - ignition barrel damaged
 

Drill won't do it and screwdriver with torx might do it if you're lucky.

But I needed a rachet & the torx bit in an adaptor on the ratchet to get enough leverage to start undoing it.

Suzuki use some really strong oranage threadlock when they assemble the yoke.