SV650.org - SV650 & Gladius 650 Forum
Page 2 of 5 1 2 345
Show 40 post(s) from this thread on one page

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)
-   Mini-Twins (http://forums.sv650.org/forumdisplay.php?f=151)
-   -   up for debate... What is the ultimate fork Sv conversion. (http://forums.sv650.org/showthread.php?t=164673)

green1 02-04-11 06:27 PM
Re: up for debate... What is the ultimate fork Sv conversion.
 
gordon its fine toot is running in the modified this year im sure

The Idle Biker 02-04-11 06:58 PM
Re: up for debate... What is the ultimate fork Sv conversion.
 
Quote:
Originally Posted by SV650Racer (Post 2513096)
Racetec emmulators, Linear springs either K-Tech or Racetec and oil/air gap and spacers set to suit. Have won us 5 championships so far so they work very well and keep the fork simple without the retro fitting of a cartridge.
I'm going to pay your shop a visit in the very near future.

mike_red2uk 02-04-11 07:48 PM
Re: up for debate... What is the ultimate fork Sv conversion.
 
Quote:
Originally Posted by toot (Post 2513206)
The rules are there to read. It states quite clearly what i have said. If Sarah is right, i suggest Mike re-writes them to state that. :rolleyes:
I agree with Toot, if my opinion counts for owt !!!:smt101

toot 02-04-11 08:03 PM
Re: up for debate... What is the ultimate fork Sv conversion.
 
Quote:
Originally Posted by SV650Racer (Post 2513107)
Thats just the thing there are some very comprehensive kits out there, some of which though arent minitwin legal as your not allowed to change the fork caps. IMHO the emmulators when set up well with the correct oil/air gap to suit the rider work superbly and dont over complicate the fork. Lots of minitwin guys and gals run that setup.

TBH though the best front end...fit a GSXR front end from a K4 onwards bike..only downer is it not legal.!.
Quote:
Originally Posted by mike_red2uk (Post 2513319)
I agree with Toot, if my opinion counts for owt !!!:smt101
See max. :D

Gordon. I asked my wife, you ask yours. They should know. :D

mike_red2uk 02-04-11 08:08 PM
Re: up for debate... What is the ultimate fork Sv conversion.
 
and i'll ask mine, when shes next talking to me !

crisis95 02-04-11 09:26 PM
Re: up for debate... What is the ultimate fork Sv conversion.
 
To be fair mate, the wife reads it as you have. But she doesn't own the rights to the series! If forks must be, externally, as they came out the factory then the rules should state this in less ambiguous terms.
Don't worry about it mate, you'll give Dave a good run in the modified...

toot 02-04-11 10:08 PM
Re: up for debate... What is the ultimate fork Sv conversion.
 
Your so kind :smt080

And your wife is right. :D

Berlin 03-04-11 07:03 PM
Re: up for debate... What is the ultimate fork Sv conversion.
 
But toot, Your forks have *two* adjusters on the top of each! Is that one for "compression" preload and one for "rebound" preload? ;)

toot 03-04-11 07:12 PM
Re: up for debate... What is the ultimate fork Sv conversion.
 
You cross eyed or sumit. :rolleyes:

mike_red2uk 03-04-11 07:31 PM
Re: up for debate... What is the ultimate fork Sv conversion.
 
Carl, stop judging everyone by your standards ! :rolleyes:


All times are GMT. The time now is 12:59 AM.
Page 2 of 5 1 2 345
Show 40 post(s) from this thread on one page

Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.