![]() |
I'm about 5'3" and have never ever had a bike I could get both feet down at the same time, and that was even learning on a 125. Even on the raptor it's tippy toes or one foot flat on the ground. You just learn to deal with it and not stop on odd cambers.
|
Quote:
I wouldn't have done it for myself (5'7") but I see no need to change it back. (Only the bike doesn't lean as much on its stand - but its reassuring to get both heels down) Don't forget to do the front if you do dog bones for the back. |
Quote:
Even doing everything possible to lower my bike, I'm still on tip-toes on both sides, but at least I can reach the ground on both sides. I doubt I'll ever be able to ride a bike where I can get both feet flat on the floor, its one of those things I accept that I can't do anything about. |
Quote:
I just wanted to say that I have had this done and it affects me so little that I'm not inclined to change it back even though I don't need it. Also I meant you shouldn't have to put up with it without trying anything at all. |
Quote:
I now have a CBR600F which I was also told would be too high for me and they 'can't be lowered' apparently. Well, yes you can! I dropped the front, back and since I can't find dogbones anywhere, I got a custom shock made instead. The bike gets quite a bit of attention at places like Boxhill as it is so low. Law, I still say a pair of Ladystar boots is always good :wink: |
OK, I'm really gonna have to meet some of you ladies, cos I must have strangely long legs for someone who is also only 5 foot 4 inches! :oops:
I had about 1 inch taken out of the seat of my SV and that was it, the rest of the bike is standard height - yet I get both feet flat on the floor. Again I only had 1 1/2 inches taken out of the seat of the Blue 'Blade and I can comfortably get the balls of both feet on the floor. Were do you measure your inside leg to? Is it just below your ankle bone (level with the top of your foot)? If so I've got a 27 inch inside leg - how des that compare. :? |
Quote:
http://www.jjsrockandpop.com/acatalo...EG_E14_TOB.jpg Always fancied a pair, but, wouldn't like to bet on them fitting under the gear lever :wink: |
K, I measure to the ground, and I'm 26/27 inches :(
|
Have to agree with most others, get longer dog bones (lowering kit), hubby fitted mine distructions here .
I lost approx 4½ inches of the total height, getting the lowering kit, and sculpting the seat. I'm 5'1 (and a bit), inside leg 28ish, and can now get both feet flat on the ground. |
You'll lot must really struggle! I'm a 29" inside leg and can only just touch the floor on a standard height SK1 :shock:
|
All times are GMT. The time now is 08:32 AM. |
Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.